Composes a genome-wide STR location table used for DragSTR model auto-calibration
Category Reference
Overview
This tool looks for low-complexity STR sequences along the reference that are later used to estimate the Dragstr model during single sample auto calibration CalibrateDragstrModel.Inputs
This command takes as input the reference (possibly a subset of intervals) and an optional STRDecimationTable decimation table (herein referred as DT).
The DT modulates how often we sample a site for each possible period and repeat length. Since there is far more positions with short period and short repeat length sampling for those combinations should be less frequent. For further details about the format of this table and interpretation of its values please check the documentation in class STRDecimationTable.
If no DT is provided, the tool uses a default one that has been tailored to work fine when run over the entire Human genome and it should be alright with other genomes of comparable size (i.e. 1 to 10Gbps). With larger genomes, that default DT will likely result in an unecessarely large number of sampled sites that it turn may increase the run time of tools that depend on the output. In contrast, with smaller genomes or subsets (using targeted intervals) it might result in a number of sampled sites too small to build accurate Dragstr model. In this case you really need to compose and provide your own DT or perhaps try out not to decimate at all (--decimation NONE).
Output
The output of this command is a zip file that contains the collection of sampled sites in binary form (all.bin), and index for that file for quick access by location interval (all.idx). Other files in the zip provide some summary and tracking information, for example the reference sequence dictionary (reference.dict), a copy of the DT (decimation.txt) and summarized stats (summary.txt).
Examples
# Human? just use the default. gatk ComposeSTRTableFile -R hg19.fasta -O hg19.str.zip # or ... gatk ComposeSTRTableFile -R hg19.fasta --decimation DEFAULT -O hg19.str.zip
# yeast genome is roughly ~ 12Mbp long. gatk ComposeSTRTableFile -R yeast.fasta --decimation custom-yeast.dt -O yeast.str.zip
# Carsonella ruddii just about 160Kbps, prorably we don't want to decimate at all: gatk ComposeSTRTableFile -R Cruddii.fasta --decimation NONE -O yeast.str.zip
Additional Information
Read filters
This Read Filter is automatically applied to the data by the Engine before processing by ComposeSTRTableFile.
ComposeSTRTableFile specific arguments
This table summarizes the command-line arguments that are specific to this tool. For more details on each argument, see the list further down below the table or click on an argument name to jump directly to that entry in the list.
Argument name(s) | Default value | Summary | |
---|---|---|---|
Required Arguments | |||
--output -O |
name of the zip file where the sites sampled will be stored | ||
--reference -R |
Reference sequence file | ||
Optional Tool Arguments | |||
--arguments_file |
read one or more arguments files and add them to the command line | ||
--cloud-index-prefetch-buffer -CIPB |
-1 | Size of the cloud-only prefetch buffer (in MB; 0 to disable). Defaults to cloudPrefetchBuffer if unset. | |
--cloud-prefetch-buffer -CPB |
40 | Size of the cloud-only prefetch buffer (in MB; 0 to disable). | |
--decimation |
DEFAULT | decimation per period and repeat. It can be "DEFAULT" to use the default values (DEFAULT), "NONE" to deactivate decimation (potentially resulting in a very large output file) or indicate the path to a file that contains the decimation matrix. | |
--disable-bam-index-caching -DBIC |
false | If true, don't cache bam indexes, this will reduce memory requirements but may harm performance if many intervals are specified. Caching is automatically disabled if there are no intervals specified. | |
--disable-sequence-dictionary-validation |
false | If specified, do not check the sequence dictionaries from our inputs for compatibility. Use at your own risk! | |
--gcs-max-retries -gcs-retries |
20 | If the GCS bucket channel errors out, how many times it will attempt to re-initiate the connection | |
--gcs-project-for-requester-pays |
Project to bill when accessing "requester pays" buckets. If unset, these buckets cannot be accessed. User must have storage.buckets.get permission on the bucket being accessed. | ||
--help -h |
false | display the help message | |
--interval-merging-rule -imr |
ALL | Interval merging rule for abutting intervals | |
--intervals -L |
One or more genomic intervals over which to operate | ||
--max-period |
8 | maximum STR period sampled | |
--max-repeats |
20 | maximum STR repeat sampled | |
--sites-only-vcf-output |
false | If true, don't emit genotype fields when writing vcf file output. | |
--version |
false | display the version number for this tool | |
Optional Common Arguments | |||
--add-output-sam-program-record |
true | If true, adds a PG tag to created SAM/BAM/CRAM files. | |
--add-output-vcf-command-line |
true | If true, adds a command line header line to created VCF files. | |
--create-output-bam-index -OBI |
true | If true, create a BAM/CRAM index when writing a coordinate-sorted BAM/CRAM file. | |
--create-output-bam-md5 -OBM |
false | If true, create a MD5 digest for any BAM/SAM/CRAM file created | |
--create-output-variant-index -OVI |
true | If true, create a VCF index when writing a coordinate-sorted VCF file. | |
--create-output-variant-md5 -OVM |
false | If true, create a a MD5 digest any VCF file created. | |
--disable-read-filter -DF |
Read filters to be disabled before analysis | ||
--disable-tool-default-read-filters |
false | Disable all tool default read filters (WARNING: many tools will not function correctly without their default read filters on) | |
--exclude-intervals -XL |
One or more genomic intervals to exclude from processing | ||
--gatk-config-file |
A configuration file to use with the GATK. | ||
--input -I |
BAM/SAM/CRAM file containing reads | ||
--interval-exclusion-padding -ixp |
0 | Amount of padding (in bp) to add to each interval you are excluding. | |
--interval-padding -ip |
0 | Amount of padding (in bp) to add to each interval you are including. | |
--interval-set-rule -isr |
UNION | Set merging approach to use for combining interval inputs | |
--lenient -LE |
false | Lenient processing of VCF files | |
--max-variants-per-shard |
0 | If non-zero, partitions VCF output into shards, each containing up to the given number of records. | |
--QUIET |
false | Whether to suppress job-summary info on System.err. | |
--read-filter -RF |
Read filters to be applied before analysis | ||
--read-index |
Indices to use for the read inputs. If specified, an index must be provided for every read input and in the same order as the read inputs. If this argument is not specified, the path to the index for each input will be inferred automatically. | ||
--read-validation-stringency -VS |
SILENT | Validation stringency for all SAM/BAM/CRAM/SRA files read by this program. The default stringency value SILENT can improve performance when processing a BAM file in which variable-length data (read, qualities, tags) do not otherwise need to be decoded. | |
--seconds-between-progress-updates |
10.0 | Output traversal statistics every time this many seconds elapse | |
--sequence-dictionary |
Use the given sequence dictionary as the master/canonical sequence dictionary. Must be a .dict file. | ||
--tmp-dir |
Temp directory to use. | ||
--use-jdk-deflater -jdk-deflater |
false | Whether to use the JdkDeflater (as opposed to IntelDeflater) | |
--use-jdk-inflater -jdk-inflater |
false | Whether to use the JdkInflater (as opposed to IntelInflater) | |
--verbosity |
INFO | Control verbosity of logging. | |
Advanced Arguments | |||
--showHidden |
false | display hidden arguments |
Argument details
Arguments in this list are specific to this tool. Keep in mind that other arguments are available that are shared with other tools (e.g. command-line GATK arguments); see Inherited arguments above.
--add-output-sam-program-record / -add-output-sam-program-record
If true, adds a PG tag to created SAM/BAM/CRAM files.
boolean true
--add-output-vcf-command-line / -add-output-vcf-command-line
If true, adds a command line header line to created VCF files.
boolean true
--arguments_file
read one or more arguments files and add them to the command line
List[File] []
--cloud-index-prefetch-buffer / -CIPB
Size of the cloud-only prefetch buffer (in MB; 0 to disable). Defaults to cloudPrefetchBuffer if unset.
int -1 [ [ -∞ ∞ ] ]
--cloud-prefetch-buffer / -CPB
Size of the cloud-only prefetch buffer (in MB; 0 to disable).
int 40 [ [ -∞ ∞ ] ]
--create-output-bam-index / -OBI
If true, create a BAM/CRAM index when writing a coordinate-sorted BAM/CRAM file.
boolean true
--create-output-bam-md5 / -OBM
If true, create a MD5 digest for any BAM/SAM/CRAM file created
boolean false
--create-output-variant-index / -OVI
If true, create a VCF index when writing a coordinate-sorted VCF file.
boolean true
--create-output-variant-md5 / -OVM
If true, create a a MD5 digest any VCF file created.
boolean false
--decimation
decimation per period and repeat. It can be "DEFAULT" to use the default values (DEFAULT), "NONE" to deactivate decimation (potentially resulting in a very large output file) or indicate the path to a file that contains the decimation matrix.
STRDecimationTable DEFAULT
--disable-bam-index-caching / -DBIC
If true, don't cache bam indexes, this will reduce memory requirements but may harm performance if many intervals are specified. Caching is automatically disabled if there are no intervals specified.
boolean false
--disable-read-filter / -DF
Read filters to be disabled before analysis
List[String] []
--disable-sequence-dictionary-validation / -disable-sequence-dictionary-validation
If specified, do not check the sequence dictionaries from our inputs for compatibility. Use at your own risk!
boolean false
--disable-tool-default-read-filters / -disable-tool-default-read-filters
Disable all tool default read filters (WARNING: many tools will not function correctly without their default read filters on)
boolean false
--exclude-intervals / -XL
One or more genomic intervals to exclude from processing
Use this argument to exclude certain parts of the genome from the analysis (like -L, but the opposite).
This argument can be specified multiple times. You can use samtools-style intervals either explicitly on the
command line (e.g. -XL 1 or -XL 1:100-200) or by loading in a file containing a list of intervals
(e.g. -XL myFile.intervals).
List[String] []
--gatk-config-file
A configuration file to use with the GATK.
String null
--gcs-max-retries / -gcs-retries
If the GCS bucket channel errors out, how many times it will attempt to re-initiate the connection
int 20 [ [ -∞ ∞ ] ]
--gcs-project-for-requester-pays
Project to bill when accessing "requester pays" buckets. If unset, these buckets cannot be accessed. User must have storage.buckets.get permission on the bucket being accessed.
String ""
--help / -h
display the help message
boolean false
--input / -I
BAM/SAM/CRAM file containing reads
List[GATKPath] []
--interval-exclusion-padding / -ixp
Amount of padding (in bp) to add to each interval you are excluding.
Use this to add padding to the intervals specified using -XL. For example, '-XL 1:100' with a
padding value of 20 would turn into '-XL 1:80-120'. This is typically used to add padding around targets when
analyzing exomes.
int 0 [ [ -∞ ∞ ] ]
--interval-merging-rule / -imr
Interval merging rule for abutting intervals
By default, the program merges abutting intervals (i.e. intervals that are directly side-by-side but do not
actually overlap) into a single continuous interval. However you can change this behavior if you want them to be
treated as separate intervals instead.
The --interval-merging-rule argument is an enumerated type (IntervalMergingRule), which can have one of the following values:
- ALL
- OVERLAPPING_ONLY
IntervalMergingRule ALL
--interval-padding / -ip
Amount of padding (in bp) to add to each interval you are including.
Use this to add padding to the intervals specified using -L. For example, '-L 1:100' with a
padding value of 20 would turn into '-L 1:80-120'. This is typically used to add padding around targets when
analyzing exomes.
int 0 [ [ -∞ ∞ ] ]
--interval-set-rule / -isr
Set merging approach to use for combining interval inputs
By default, the program will take the UNION of all intervals specified using -L and/or -XL. However, you can
change this setting for -L, for example if you want to take the INTERSECTION of the sets instead. E.g. to
perform the analysis only on chromosome 1 exomes, you could specify -L exomes.intervals -L 1 --interval-set-rule
INTERSECTION. However, it is not possible to modify the merging approach for intervals passed using -XL (they will
always be merged using UNION).
Note that if you specify both -L and -XL, the -XL interval set will be subtracted from the -L interval set.
The --interval-set-rule argument is an enumerated type (IntervalSetRule), which can have one of the following values:
- UNION
- Take the union of all intervals
- INTERSECTION
- Take the intersection of intervals (the subset that overlaps all intervals specified)
IntervalSetRule UNION
--intervals / -L
One or more genomic intervals over which to operate
List[String] []
--lenient / -LE
Lenient processing of VCF files
boolean false
--max-period
maximum STR period sampled
int 8 [ [ 1 20 ] ]
--max-repeats
maximum STR repeat sampled
int 20 [ [ 1 100 ] ]
--max-variants-per-shard
If non-zero, partitions VCF output into shards, each containing up to the given number of records.
int 0 [ [ 0 ∞ ] ]
--output / -O
name of the zip file where the sites sampled will be stored
R GATKPath null
--QUIET
Whether to suppress job-summary info on System.err.
Boolean false
--read-filter / -RF
Read filters to be applied before analysis
List[String] []
--read-index / -read-index
Indices to use for the read inputs. If specified, an index must be provided for every read input and in the same order as the read inputs. If this argument is not specified, the path to the index for each input will be inferred automatically.
List[GATKPath] []
--read-validation-stringency / -VS
Validation stringency for all SAM/BAM/CRAM/SRA files read by this program. The default stringency value SILENT can improve performance when processing a BAM file in which variable-length data (read, qualities, tags) do not otherwise need to be decoded.
The --read-validation-stringency argument is an enumerated type (ValidationStringency), which can have one of the following values:
- STRICT
- LENIENT
- SILENT
ValidationStringency SILENT
--reference / -R
Reference sequence file
R GATKPath null
--seconds-between-progress-updates / -seconds-between-progress-updates
Output traversal statistics every time this many seconds elapse
double 10.0 [ [ -∞ ∞ ] ]
--sequence-dictionary / -sequence-dictionary
Use the given sequence dictionary as the master/canonical sequence dictionary. Must be a .dict file.
GATKPath null
--showHidden / -showHidden
display hidden arguments
boolean false
--sites-only-vcf-output
If true, don't emit genotype fields when writing vcf file output.
boolean false
--tmp-dir
Temp directory to use.
GATKPath null
--use-jdk-deflater / -jdk-deflater
Whether to use the JdkDeflater (as opposed to IntelDeflater)
boolean false
--use-jdk-inflater / -jdk-inflater
Whether to use the JdkInflater (as opposed to IntelInflater)
boolean false
--verbosity / -verbosity
Control verbosity of logging.
The --verbosity argument is an enumerated type (LogLevel), which can have one of the following values:
- ERROR
- WARNING
- INFO
- DEBUG
LogLevel INFO
--version
display the version number for this tool
boolean false
GATK version 4.2.4.0-SNAPSHOT built at Thu, 16 Dec 2021 11:57:48 -0800.
0 comments
Please sign in to leave a comment.