Left align and trim vairants
Category Variant Manipulation
Overview
Left-align indels in a variant callsetThis tool takes a VCF file, left-aligns the indels and trims common bases from indels, leaving them with a minimum representation. The same indel can often be placed at multiple positions and still represent the same haplotype. While the standard convention with VCF is to place an indel at the left-most position this isn't always done, so this tool can be used to left-align them. This tool optionally splits multiallelic sites into biallelics and left-aligns individual alleles. Optionally, the tool will not trim common bases from indels.
Input
A variant call set to left-align and trim.
Output
A left-aligned VCF.
Usage examples
Left align and trim alleles
gatk LeftAlignAndTrimVariants \ -R reference.fasta \ -V input.vcf \ -O output.vcf
Left align and don't trim alleles
gatk LeftAlignAndTrimVariants \ -R reference.fasta \ -V input.vcf \ -O output.vcf \ --dont-trim-alleles
Left align and trim alleles, process alleles <= 208 bases
gatk LeftAlignAndTrimVariants \ -R reference.fasta \ -V input.vcf \ -O output.vcf \ --max-indel-length 208
Split multiallics into biallelics, left align and trim alleles
gatk LeftAlignAndTrimVariants \ -R reference.fasta \ -V input.vcf \ -O output.vcf \ --split-multi-allelics
Split multiallelics into biallics, left align but don't trim alleles, and store the original AC, AF, and AN values
gatk LeftAlignAndTrimVariants \ -R reference.fasta \ -V input.vcf \ -O output.vcf \ --split-multi-allelics \ --dont-trim-alleles --keep-original-ac
Left align variants up to 2000 bases to the left (default is at most left aligning 1000 bases to left)
gatk LeftAlignAndTrimVariants \ -R reference.fasta \ -V input.vcf \ -O output.vcf \ --max-leading-bases 2000
LeftAlignAndTrimVariants specific arguments
This table summarizes the command-line arguments that are specific to this tool. For more details on each argument, see the list further down below the table or click on an argument name to jump directly to that entry in the list.
Argument name(s) | Default value | Summary | |
---|---|---|---|
Required Arguments | |||
--output -O |
null | File to which variants should be written | |
--reference -R |
null | Reference sequence file | |
--variant -V |
null | A VCF file containing variants | |
Optional Tool Arguments | |||
--arguments_file |
[] | read one or more arguments files and add them to the command line | |
--cloud-index-prefetch-buffer -CIPB |
-1 | Size of the cloud-only prefetch buffer (in MB; 0 to disable). Defaults to cloudPrefetchBuffer if unset. | |
--cloud-prefetch-buffer -CPB |
40 | Size of the cloud-only prefetch buffer (in MB; 0 to disable). | |
--disable-bam-index-caching -DBIC |
false | If true, don't cache bam indexes, this will reduce memory requirements but may harm performance if many intervals are specified. Caching is automatically disabled if there are no intervals specified. | |
--disable-sequence-dictionary-validation |
false | If specified, do not check the sequence dictionaries from our inputs for compatibility. Use at your own risk! | |
--dont-trim-alleles -no-trim |
false | Do not Trim alleles to remove bases common to all of them | |
--gcs-max-retries -gcs-retries |
20 | If the GCS bucket channel errors out, how many times it will attempt to re-initiate the connection | |
--gcs-project-for-requester-pays |
"" | Project to bill when accessing "requester pays" buckets. If unset, these buckets cannot be accessed. | |
--help -h |
false | display the help message | |
--interval-merging-rule -imr |
ALL | Interval merging rule for abutting intervals | |
--intervals -L |
[] | One or more genomic intervals over which to operate | |
--keep-original-ac |
false | Store the original AC, AF, and AN values after subsetting | |
--max-indel-length |
200 | Set maximum indel size to realign | |
--max-leading-bases |
1000 | Set max reference window size to look back before allele | |
--sites-only-vcf-output |
false | If true, don't emit genotype fields when writing vcf file output. | |
--split-multi-allelics |
false | Split multiallelic records and left-align individual alleles | |
--version |
false | display the version number for this tool | |
Optional Common Arguments | |||
--add-output-sam-program-record |
true | If true, adds a PG tag to created SAM/BAM/CRAM files. | |
--add-output-vcf-command-line |
true | If true, adds a command line header line to created VCF files. | |
--create-output-bam-index -OBI |
true | If true, create a BAM/CRAM index when writing a coordinate-sorted BAM/CRAM file. | |
--create-output-bam-md5 -OBM |
false | If true, create a MD5 digest for any BAM/SAM/CRAM file created | |
--create-output-variant-index -OVI |
true | If true, create a VCF index when writing a coordinate-sorted VCF file. | |
--create-output-variant-md5 -OVM |
false | If true, create a a MD5 digest any VCF file created. | |
--disable-read-filter -DF |
[] | Read filters to be disabled before analysis | |
--disable-tool-default-read-filters |
false | Disable all tool default read filters (WARNING: many tools will not function correctly without their default read filters on) | |
--exclude-intervals -XL |
[] | One or more genomic intervals to exclude from processing | |
--gatk-config-file |
null | A configuration file to use with the GATK. | |
--input -I |
[] | BAM/SAM/CRAM file containing reads | |
--interval-exclusion-padding -ixp |
0 | Amount of padding (in bp) to add to each interval you are excluding. | |
--interval-padding -ip |
0 | Amount of padding (in bp) to add to each interval you are including. | |
--interval-set-rule -isr |
UNION | Set merging approach to use for combining interval inputs | |
--lenient -LE |
false | Lenient processing of VCF files | |
--QUIET |
false | Whether to suppress job-summary info on System.err. | |
--read-filter -RF |
[] | Read filters to be applied before analysis | |
--read-index |
[] | Indices to use for the read inputs. If specified, an index must be provided for every read input and in the same order as the read inputs. If this argument is not specified, the path to the index for each input will be inferred automatically. | |
--read-validation-stringency -VS |
SILENT | Validation stringency for all SAM/BAM/CRAM/SRA files read by this program. The default stringency value SILENT can improve performance when processing a BAM file in which variable-length data (read, qualities, tags) do not otherwise need to be decoded. | |
--seconds-between-progress-updates |
10.0 | Output traversal statistics every time this many seconds elapse | |
--sequence-dictionary |
null | Use the given sequence dictionary as the master/canonical sequence dictionary. Must be a .dict file. | |
--tmp-dir |
null | Temp directory to use. | |
--use-jdk-deflater -jdk-deflater |
false | Whether to use the JdkDeflater (as opposed to IntelDeflater) | |
--use-jdk-inflater -jdk-inflater |
false | Whether to use the JdkInflater (as opposed to IntelInflater) | |
--verbosity |
INFO | Control verbosity of logging. | |
Advanced Arguments | |||
--showHidden |
false | display hidden arguments |
Argument details
Arguments in this list are specific to this tool. Keep in mind that other arguments are available that are shared with other tools (e.g. command-line GATK arguments); see Inherited arguments above.
--add-output-sam-program-record / -add-output-sam-program-record
If true, adds a PG tag to created SAM/BAM/CRAM files.
boolean true
--add-output-vcf-command-line / -add-output-vcf-command-line
If true, adds a command line header line to created VCF files.
boolean true
--arguments_file / NA
read one or more arguments files and add them to the command line
List[File] []
--cloud-index-prefetch-buffer / -CIPB
Size of the cloud-only prefetch buffer (in MB; 0 to disable). Defaults to cloudPrefetchBuffer if unset.
int -1 [ [ -∞ ∞ ] ]
--cloud-prefetch-buffer / -CPB
Size of the cloud-only prefetch buffer (in MB; 0 to disable).
int 40 [ [ -∞ ∞ ] ]
--create-output-bam-index / -OBI
If true, create a BAM/CRAM index when writing a coordinate-sorted BAM/CRAM file.
boolean true
--create-output-bam-md5 / -OBM
If true, create a MD5 digest for any BAM/SAM/CRAM file created
boolean false
--create-output-variant-index / -OVI
If true, create a VCF index when writing a coordinate-sorted VCF file.
boolean true
--create-output-variant-md5 / -OVM
If true, create a a MD5 digest any VCF file created.
boolean false
--disable-bam-index-caching / -DBIC
If true, don't cache bam indexes, this will reduce memory requirements but may harm performance if many intervals are specified. Caching is automatically disabled if there are no intervals specified.
boolean false
--disable-read-filter / -DF
Read filters to be disabled before analysis
List[String] []
--disable-sequence-dictionary-validation / -disable-sequence-dictionary-validation
If specified, do not check the sequence dictionaries from our inputs for compatibility. Use at your own risk!
boolean false
--disable-tool-default-read-filters / -disable-tool-default-read-filters
Disable all tool default read filters (WARNING: many tools will not function correctly without their default read filters on)
boolean false
--dont-trim-alleles / -no-trim
Do not Trim alleles to remove bases common to all of them
If this argument is set, bases common to all alleles will not be removed and will not leave their minimal representation.
boolean false
--exclude-intervals / -XL
One or more genomic intervals to exclude from processing
Use this argument to exclude certain parts of the genome from the analysis (like -L, but the opposite).
This argument can be specified multiple times. You can use samtools-style intervals either explicitly on the
command line (e.g. -XL 1 or -XL 1:100-200) or by loading in a file containing a list of intervals
(e.g. -XL myFile.intervals).
List[String] []
--gatk-config-file / NA
A configuration file to use with the GATK.
String null
--gcs-max-retries / -gcs-retries
If the GCS bucket channel errors out, how many times it will attempt to re-initiate the connection
int 20 [ [ -∞ ∞ ] ]
--gcs-project-for-requester-pays / NA
Project to bill when accessing "requester pays" buckets. If unset, these buckets cannot be accessed.
String ""
--help / -h
display the help message
boolean false
--input / -I
BAM/SAM/CRAM file containing reads
List[String] []
--interval-exclusion-padding / -ixp
Amount of padding (in bp) to add to each interval you are excluding.
Use this to add padding to the intervals specified using -XL. For example, '-XL 1:100' with a
padding value of 20 would turn into '-XL 1:80-120'. This is typically used to add padding around targets when
analyzing exomes.
int 0 [ [ -∞ ∞ ] ]
--interval-merging-rule / -imr
Interval merging rule for abutting intervals
By default, the program merges abutting intervals (i.e. intervals that are directly side-by-side but do not
actually overlap) into a single continuous interval. However you can change this behavior if you want them to be
treated as separate intervals instead.
The --interval-merging-rule argument is an enumerated type (IntervalMergingRule), which can have one of the following values:
- ALL
- OVERLAPPING_ONLY
IntervalMergingRule ALL
--interval-padding / -ip
Amount of padding (in bp) to add to each interval you are including.
Use this to add padding to the intervals specified using -L. For example, '-L 1:100' with a
padding value of 20 would turn into '-L 1:80-120'. This is typically used to add padding around targets when
analyzing exomes.
int 0 [ [ -∞ ∞ ] ]
--interval-set-rule / -isr
Set merging approach to use for combining interval inputs
By default, the program will take the UNION of all intervals specified using -L and/or -XL. However, you can
change this setting for -L, for example if you want to take the INTERSECTION of the sets instead. E.g. to
perform the analysis only on chromosome 1 exomes, you could specify -L exomes.intervals -L 1 --interval-set-rule
INTERSECTION. However, it is not possible to modify the merging approach for intervals passed using -XL (they will
always be merged using UNION).
Note that if you specify both -L and -XL, the -XL interval set will be subtracted from the -L interval set.
The --interval-set-rule argument is an enumerated type (IntervalSetRule), which can have one of the following values:
- UNION
- Take the union of all intervals
- INTERSECTION
- Take the intersection of intervals (the subset that overlaps all intervals specified)
IntervalSetRule UNION
--intervals / -L
One or more genomic intervals over which to operate
List[String] []
--keep-original-ac / NA
Store the original AC, AF, and AN values after subsetting
When subsetting a callset, this tool recalculates the AC, AF, and AN values corresponding to the contents of the
subset. If this flag is enabled, the original values of those annotations will be stored in new annotations called
AC_Orig, AF_Orig, and AN_Orig.
boolean false
--lenient / -LE
Lenient processing of VCF files
boolean false
--max-indel-length / NA
Set maximum indel size to realign
Maximum indel size to realign. Indels larger than this will be left unadjusted.
int 200 [ [ -∞ ∞ ] ]
--max-leading-bases / NA
Set max reference window size to look back before allele
Distance in reference to look back before allele
int 1000 [ [ -∞ ∞ ] ]
--output / -O
File to which variants should be written
Output file to which to write left aligned variants
R File null
--QUIET / NA
Whether to suppress job-summary info on System.err.
Boolean false
--read-filter / -RF
Read filters to be applied before analysis
List[String] []
--read-index / -read-index
Indices to use for the read inputs. If specified, an index must be provided for every read input and in the same order as the read inputs. If this argument is not specified, the path to the index for each input will be inferred automatically.
List[String] []
--read-validation-stringency / -VS
Validation stringency for all SAM/BAM/CRAM/SRA files read by this program. The default stringency value SILENT can improve performance when processing a BAM file in which variable-length data (read, qualities, tags) do not otherwise need to be decoded.
The --read-validation-stringency argument is an enumerated type (ValidationStringency), which can have one of the following values:
- STRICT
- LENIENT
- SILENT
ValidationStringency SILENT
--reference / -R
Reference sequence file
R String null
--seconds-between-progress-updates / -seconds-between-progress-updates
Output traversal statistics every time this many seconds elapse
double 10.0 [ [ -∞ ∞ ] ]
--sequence-dictionary / -sequence-dictionary
Use the given sequence dictionary as the master/canonical sequence dictionary. Must be a .dict file.
String null
--showHidden / -showHidden
display hidden arguments
boolean false
--sites-only-vcf-output / NA
If true, don't emit genotype fields when writing vcf file output.
boolean false
--split-multi-allelics / NA
Split multiallelic records and left-align individual alleles
If this argument is set, split multiallelic records and left-align individual alleles.
If this argument is not set, multiallelic records are not attempted to left-align and will be copied as is.
boolean false
--tmp-dir / NA
Temp directory to use.
String null
--use-jdk-deflater / -jdk-deflater
Whether to use the JdkDeflater (as opposed to IntelDeflater)
boolean false
--use-jdk-inflater / -jdk-inflater
Whether to use the JdkInflater (as opposed to IntelInflater)
boolean false
--variant / -V
A VCF file containing variants
R String null
--verbosity / -verbosity
Control verbosity of logging.
The --verbosity argument is an enumerated type (LogLevel), which can have one of the following values:
- ERROR
- WARNING
- INFO
- DEBUG
LogLevel INFO
--version / NA
display the version number for this tool
boolean false
GATK version 4.0.10.0 built at 25-30-2019 05:30:15.
0 comments
Please sign in to leave a comment.