Split intervals into sub-interval files.
Category Intervals Manipulation
Overview
This tool takes in intervals via the standard arguments of IntervalArgumentCollection and splits them into interval files for scattering. The resulting files contain equal number of bases.Standard GATK engine arguments include -L and -XL, interval padding, and interval set rule etc. For example, for the -L argument, the tool accepts GATK-style intervals (.list or .intervals), BED files and VCF files. See --subdivision-mode parameter for more options.
Usage example
gatk SplitIntervals \ -R ref_fasta.fa \ -L intervals.list \ --scatter-count 10 \ -O interval-files-folder
The -O argument specifies a directory name for the scatter intervals files. Each file will be named, e.g 0000-scattered.interval_list, 0001-scattered.interval_list, 0002-scattered.interval_list and so on. The default --scatter-count is 1 and so this value should be changed to utilize the tool's functionality. Specify --subdivision-mode BALANCING_WITHOUT_INTERVAL_SUBDIVISION to avoid splitting input intervals -- that is, the set of input intervals is split, but individual intervals are left intact. This may affect results when using assembly-based callers downstream.
** gatk SplitIntervals \ * -R ref_fasta.fa \ * -L adjacent_intervals.list \ * --scatter-count 10 \ * --interval-merging-rule OVERLAPPING_ONLY \ * --subdivision-mode BALANCING_WITHOUT_INTERVAL_SUBDIVISION_WITH_OVERFLOW * -O interval-files-folder *
Note that adjacent intervals will be merged by default. In cases where the desired behavior is to apportion a set of small adjacent intervals with nearly uniform runtime among X new interval lists, the argument `--interval-merging-rule OVERLAPPING_ONLY` should be included.
Additional Information
Read filters
This Read Filter is automatically applied to the data by the Engine before processing by SplitIntervals.
SplitIntervals specific arguments
This table summarizes the command-line arguments that are specific to this tool. For more details on each argument, see the list further down below the table or click on an argument name to jump directly to that entry in the list.
Argument name(s) | Default value | Summary | |
---|---|---|---|
Required Arguments | |||
--output -O |
The directory into which to write the scattered interval sub-directories. | ||
Optional Tool Arguments | |||
--arguments_file |
read one or more arguments files and add them to the command line | ||
--cloud-index-prefetch-buffer -CIPB |
-1 | Size of the cloud-only prefetch buffer (in MB; 0 to disable). Defaults to cloudPrefetchBuffer if unset. | |
--cloud-prefetch-buffer -CPB |
40 | Size of the cloud-only prefetch buffer (in MB; 0 to disable). | |
--disable-bam-index-caching -DBIC |
false | If true, don't cache bam indexes, this will reduce memory requirements but may harm performance if many intervals are specified. Caching is automatically disabled if there are no intervals specified. | |
--disable-sequence-dictionary-validation |
false | If specified, do not check the sequence dictionaries from our inputs for compatibility. Use at your own risk! | |
--dont-mix-contigs |
false | Scattered interval files do not contain intervals from multiple contigs. This is applied after the initial scatter, so that the requested scatter count is a lower bound on the number of actual scattered files. | |
--extension |
-scattered.interval_list | Extension to use when writing interval files | |
--gcs-max-retries -gcs-retries |
20 | If the GCS bucket channel errors out, how many times it will attempt to re-initiate the connection | |
--gcs-project-for-requester-pays |
Project to bill when accessing "requester pays" buckets. If unset, these buckets cannot be accessed. User must have storage.buckets.get permission on the bucket being accessed. | ||
--help -h |
false | display the help message | |
--interval-file-num-digits |
4 | Number of digits to use when writing interval files | |
--interval-file-prefix |
Prefix to use when writing interval files | ||
--interval-merging-rule -imr |
ALL | Interval merging rule for abutting intervals | |
--intervals -L |
One or more genomic intervals over which to operate | ||
--min-contig-size |
0 | Minimum contig size to keep if getting intervals from the reference | |
--reference -R |
Reference sequence | ||
--scatter-count -scatter |
1 | scatter count: number of output interval files to split into | |
--sites-only-vcf-output |
false | If true, don't emit genotype fields when writing vcf file output. | |
--subdivision-mode -mode |
INTERVAL_SUBDIVISION | How to divide intervals. | |
--version |
false | display the version number for this tool | |
Optional Common Arguments | |||
--add-output-sam-program-record |
true | If true, adds a PG tag to created SAM/BAM/CRAM files. | |
--add-output-vcf-command-line |
true | If true, adds a command line header line to created VCF files. | |
--create-output-bam-index -OBI |
true | If true, create a BAM/CRAM index when writing a coordinate-sorted BAM/CRAM file. | |
--create-output-bam-md5 -OBM |
false | If true, create a MD5 digest for any BAM/SAM/CRAM file created | |
--create-output-variant-index -OVI |
true | If true, create a VCF index when writing a coordinate-sorted VCF file. | |
--create-output-variant-md5 -OVM |
false | If true, create a a MD5 digest any VCF file created. | |
--disable-read-filter -DF |
Read filters to be disabled before analysis | ||
--disable-tool-default-read-filters |
false | Disable all tool default read filters (WARNING: many tools will not function correctly without their default read filters on) | |
--exclude-intervals -XL |
One or more genomic intervals to exclude from processing | ||
--gatk-config-file |
A configuration file to use with the GATK. | ||
--input -I |
BAM/SAM/CRAM file containing reads | ||
--interval-exclusion-padding -ixp |
0 | Amount of padding (in bp) to add to each interval you are excluding. | |
--interval-padding -ip |
0 | Amount of padding (in bp) to add to each interval you are including. | |
--interval-set-rule -isr |
UNION | Set merging approach to use for combining interval inputs | |
--lenient -LE |
false | Lenient processing of VCF files | |
--max-variants-per-shard |
0 | If non-zero, partitions VCF output into shards, each containing up to the given number of records. | |
--QUIET |
false | Whether to suppress job-summary info on System.err. | |
--read-filter -RF |
Read filters to be applied before analysis | ||
--read-index |
Indices to use for the read inputs. If specified, an index must be provided for every read input and in the same order as the read inputs. If this argument is not specified, the path to the index for each input will be inferred automatically. | ||
--read-validation-stringency -VS |
SILENT | Validation stringency for all SAM/BAM/CRAM/SRA files read by this program. The default stringency value SILENT can improve performance when processing a BAM file in which variable-length data (read, qualities, tags) do not otherwise need to be decoded. | |
--seconds-between-progress-updates |
10.0 | Output traversal statistics every time this many seconds elapse | |
--sequence-dictionary |
Use the given sequence dictionary as the master/canonical sequence dictionary. Must be a .dict file. | ||
--tmp-dir |
Temp directory to use. | ||
--use-jdk-deflater -jdk-deflater |
false | Whether to use the JdkDeflater (as opposed to IntelDeflater) | |
--use-jdk-inflater -jdk-inflater |
false | Whether to use the JdkInflater (as opposed to IntelInflater) | |
--verbosity |
INFO | Control verbosity of logging. | |
Advanced Arguments | |||
--showHidden |
false | display hidden arguments |
Argument details
Arguments in this list are specific to this tool. Keep in mind that other arguments are available that are shared with other tools (e.g. command-line GATK arguments); see Inherited arguments above.
--add-output-sam-program-record / -add-output-sam-program-record
If true, adds a PG tag to created SAM/BAM/CRAM files.
boolean true
--add-output-vcf-command-line / -add-output-vcf-command-line
If true, adds a command line header line to created VCF files.
boolean true
--arguments_file
read one or more arguments files and add them to the command line
List[File] []
--cloud-index-prefetch-buffer / -CIPB
Size of the cloud-only prefetch buffer (in MB; 0 to disable). Defaults to cloudPrefetchBuffer if unset.
int -1 [ [ -∞ ∞ ] ]
--cloud-prefetch-buffer / -CPB
Size of the cloud-only prefetch buffer (in MB; 0 to disable).
int 40 [ [ -∞ ∞ ] ]
--create-output-bam-index / -OBI
If true, create a BAM/CRAM index when writing a coordinate-sorted BAM/CRAM file.
boolean true
--create-output-bam-md5 / -OBM
If true, create a MD5 digest for any BAM/SAM/CRAM file created
boolean false
--create-output-variant-index / -OVI
If true, create a VCF index when writing a coordinate-sorted VCF file.
boolean true
--create-output-variant-md5 / -OVM
If true, create a a MD5 digest any VCF file created.
boolean false
--disable-bam-index-caching / -DBIC
If true, don't cache bam indexes, this will reduce memory requirements but may harm performance if many intervals are specified. Caching is automatically disabled if there are no intervals specified.
boolean false
--disable-read-filter / -DF
Read filters to be disabled before analysis
List[String] []
--disable-sequence-dictionary-validation / -disable-sequence-dictionary-validation
If specified, do not check the sequence dictionaries from our inputs for compatibility. Use at your own risk!
boolean false
--disable-tool-default-read-filters / -disable-tool-default-read-filters
Disable all tool default read filters (WARNING: many tools will not function correctly without their default read filters on)
boolean false
--dont-mix-contigs
Scattered interval files do not contain intervals from multiple contigs. This is applied after the initial scatter, so that the requested scatter count is a lower bound on the number of actual scattered files.
boolean false
--exclude-intervals / -XL
One or more genomic intervals to exclude from processing
Use this argument to exclude certain parts of the genome from the analysis (like -L, but the opposite).
This argument can be specified multiple times. You can use samtools-style intervals either explicitly on the
command line (e.g. -XL 1 or -XL 1:100-200) or by loading in a file containing a list of intervals
(e.g. -XL myFile.intervals).
List[String] []
--extension
Extension to use when writing interval files
String -scattered.interval_list
--gatk-config-file
A configuration file to use with the GATK.
String null
--gcs-max-retries / -gcs-retries
If the GCS bucket channel errors out, how many times it will attempt to re-initiate the connection
int 20 [ [ -∞ ∞ ] ]
--gcs-project-for-requester-pays
Project to bill when accessing "requester pays" buckets. If unset, these buckets cannot be accessed. User must have storage.buckets.get permission on the bucket being accessed.
String ""
--help / -h
display the help message
boolean false
--input / -I
BAM/SAM/CRAM file containing reads
List[GATKPath] []
--interval-exclusion-padding / -ixp
Amount of padding (in bp) to add to each interval you are excluding.
Use this to add padding to the intervals specified using -XL. For example, '-XL 1:100' with a
padding value of 20 would turn into '-XL 1:80-120'. This is typically used to add padding around targets when
analyzing exomes.
int 0 [ [ -∞ ∞ ] ]
--interval-file-num-digits
Number of digits to use when writing interval files
int 4 [ [ 1 ∞ ] ]
--interval-file-prefix
Prefix to use when writing interval files
String ""
--interval-merging-rule / -imr
Interval merging rule for abutting intervals
By default, the program merges abutting intervals (i.e. intervals that are directly side-by-side but do not
actually overlap) into a single continuous interval. However you can change this behavior if you want them to be
treated as separate intervals instead.
The --interval-merging-rule argument is an enumerated type (IntervalMergingRule), which can have one of the following values:
- ALL
- OVERLAPPING_ONLY
IntervalMergingRule ALL
--interval-padding / -ip
Amount of padding (in bp) to add to each interval you are including.
Use this to add padding to the intervals specified using -L. For example, '-L 1:100' with a
padding value of 20 would turn into '-L 1:80-120'. This is typically used to add padding around targets when
analyzing exomes.
int 0 [ [ -∞ ∞ ] ]
--interval-set-rule / -isr
Set merging approach to use for combining interval inputs
By default, the program will take the UNION of all intervals specified using -L and/or -XL. However, you can
change this setting for -L, for example if you want to take the INTERSECTION of the sets instead. E.g. to
perform the analysis only on chromosome 1 exomes, you could specify -L exomes.intervals -L 1 --interval-set-rule
INTERSECTION. However, it is not possible to modify the merging approach for intervals passed using -XL (they will
always be merged using UNION).
Note that if you specify both -L and -XL, the -XL interval set will be subtracted from the -L interval set.
The --interval-set-rule argument is an enumerated type (IntervalSetRule), which can have one of the following values:
- UNION
- Take the union of all intervals
- INTERSECTION
- Take the intersection of intervals (the subset that overlaps all intervals specified)
IntervalSetRule UNION
--intervals / -L
One or more genomic intervals over which to operate
List[String] []
--lenient / -LE
Lenient processing of VCF files
boolean false
--max-variants-per-shard
If non-zero, partitions VCF output into shards, each containing up to the given number of records.
int 0 [ [ 0 ∞ ] ]
--min-contig-size
Minimum contig size to keep if getting intervals from the reference
int 0 [ [ -∞ ∞ ] ]
--output / -O
The directory into which to write the scattered interval sub-directories.
R File null
--QUIET
Whether to suppress job-summary info on System.err.
Boolean false
--read-filter / -RF
Read filters to be applied before analysis
List[String] []
--read-index / -read-index
Indices to use for the read inputs. If specified, an index must be provided for every read input and in the same order as the read inputs. If this argument is not specified, the path to the index for each input will be inferred automatically.
List[GATKPath] []
--read-validation-stringency / -VS
Validation stringency for all SAM/BAM/CRAM/SRA files read by this program. The default stringency value SILENT can improve performance when processing a BAM file in which variable-length data (read, qualities, tags) do not otherwise need to be decoded.
The --read-validation-stringency argument is an enumerated type (ValidationStringency), which can have one of the following values:
- STRICT
- LENIENT
- SILENT
ValidationStringency SILENT
--reference / -R
Reference sequence
GATKPath null
--scatter-count / -scatter
scatter count: number of output interval files to split into
int 1 [ [ -∞ ∞ ] ]
--seconds-between-progress-updates / -seconds-between-progress-updates
Output traversal statistics every time this many seconds elapse
double 10.0 [ [ -∞ ∞ ] ]
--sequence-dictionary / -sequence-dictionary
Use the given sequence dictionary as the master/canonical sequence dictionary. Must be a .dict file.
GATKPath null
--showHidden / -showHidden
display hidden arguments
boolean false
--sites-only-vcf-output
If true, don't emit genotype fields when writing vcf file output.
boolean false
--subdivision-mode / -mode
How to divide intervals.
The --subdivision-mode argument is an enumerated type (IntervalListScatterMode), which can have one of the following values:
- INTERVAL_SUBDIVISION
- Scatter the interval list into similarly sized interval lists (by base count), breaking up intervals as needed.
- BALANCING_WITHOUT_INTERVAL_SUBDIVISION
- Scatter the interval list into similarly sized interval lists (by base count), but without breaking up intervals.
- BALANCING_WITHOUT_INTERVAL_SUBDIVISION_WITH_OVERFLOW
- Scatter the interval list into similarly sized interval lists (by base count), but without breaking up intervals. Will overflow current interval list so that the remaining lists will not have too many bases to deal with.
- INTERVAL_COUNT
- Scatter the interval list into similarly sized interval lists (by interval count, not by base count). Resulting interval lists will contain similar number of intervals.
IntervalListScatterMode INTERVAL_SUBDIVISION
--tmp-dir
Temp directory to use.
GATKPath null
--use-jdk-deflater / -jdk-deflater
Whether to use the JdkDeflater (as opposed to IntelDeflater)
boolean false
--use-jdk-inflater / -jdk-inflater
Whether to use the JdkInflater (as opposed to IntelInflater)
boolean false
--verbosity / -verbosity
Control verbosity of logging.
The --verbosity argument is an enumerated type (LogLevel), which can have one of the following values:
- ERROR
- WARNING
- INFO
- DEBUG
LogLevel INFO
--version
display the version number for this tool
boolean false
GATK version 4.2.4.0-SNAPSHOT built at Thu, 16 Dec 2021 11:57:48 -0800.
0 comments
Please sign in to leave a comment.