Functional annotation for segment files. The output formats are not well-defined and subject to change.
Category Variant Evaluation and Refinement
Overview
Perform functional annotation on a segment file (tsv). Outputs two files. The first is a tsv where each row is a segment and the annotations are the covered genes and which genes+exon is overlapped by the segment breakpoints. The second file has a gene for each row. The rest of the information is the segment on which it is covered. The first file will have the name as specified by the output parameter. The second will have '.gene_list.txt' appended. The functionality here is the same as seen in Oncotator with a SEG file as input, but with both SIMPLE_TSV and GENE_LIST as outputs.
Note that FuncotateSegments will support seg files from the GATK, whereas Oncotator will not.
FuncotateSegments can support hg38 seg files from the GATK.
FuncotateSegments does not support direct reading of cloud-based datasources.
For more information about Oncotator, on small variants, see Ramos AH, Lichtenstein L, et al. Oncotator: Cancer Variant Annotation Tool. Human Mutation (2015). http://dx.doi.org/10.1002/humu.22771
Usage example
./gatk FuncotateSegments \ --data-sources-path dataSourcesFolder/ \ --ref-version hg19 \ --output-file-format SEG \ -R reference.fasta \ --segments input.seg \ -O input.seg.funcotated.tsv \ --transcript-list tx_list.txt
Additional Information
Read filters
This Read Filter is automatically applied to the data by the Engine before processing by FuncotateSegments.
FuncotateSegments specific arguments
This table summarizes the command-line arguments that are specific to this tool. For more details on each argument, see the list further down below the table or click on an argument name to jump directly to that entry in the list.
Argument name(s) | Default value | Summary | |
---|---|---|---|
Required Arguments | |||
--data-sources-path |
The path to a data source folder for Funcotator. May be specified more than once to handle multiple data source folders. | ||
--output -O |
Output file to which annotated variants should be written. | ||
--output-file-format |
The output file format. Either VCF, MAF, or SEG. Please note that MAF output for germline use case VCFs is unsupported. SEG will generate two output files: a simple tsv and a gene list. | ||
--ref-version |
The version of the Human Genome reference to use (e.g. hg19, hg38, etc.). This will correspond to a sub-folder of each data source corresponding to that data source for the given reference. | ||
--reference -R |
Reference sequence file | ||
--segments |
Input segment file (tab-separated values). Must have a call column. | ||
Optional Tool Arguments | |||
--alias-to-key-mapping |
[MEAN_LOG2_COPY_RATIO:Segment_Mean, CALL:Segment_Call, sample:Sample, sample_id:Sample, NUM_POINTS_COPY_RATIO:Num_Probes] | (Advanced) Mapping between an alias and key values that are recognized by the backend. Users should not typically have to specify this. | |
--annotation-default |
Annotations to include in all annotated variants if the annotation is not specified in the data sources (in the format :). This will add the specified annotation to every annotated variant if it is not already present. | ||
--annotation-override |
Override values for annotations (in the format :). Replaces existing annotations of the given name with given values. | ||
--arguments_file |
read one or more arguments files and add them to the command line | ||
--cloud-index-prefetch-buffer -CIPB |
-1 | Size of the cloud-only prefetch buffer (in MB; 0 to disable). Defaults to cloudPrefetchBuffer if unset. | |
--cloud-prefetch-buffer -CPB |
40 | Size of the cloud-only prefetch buffer (in MB; 0 to disable). | |
--disable-bam-index-caching -DBIC |
false | If true, don't cache bam indexes, this will reduce memory requirements but may harm performance if many intervals are specified. Caching is automatically disabled if there are no intervals specified. | |
--disable-sequence-dictionary-validation |
false | If specified, do not check the sequence dictionaries from our inputs for compatibility. Use at your own risk! | |
--exclude-field |
Fields that should not be rendered in the final output. Only exact name matches will be excluded. | ||
--gcs-max-retries -gcs-retries |
20 | If the GCS bucket channel errors out, how many times it will attempt to re-initiate the connection | |
--gcs-project-for-requester-pays |
Project to bill when accessing "requester pays" buckets. If unset, these buckets cannot be accessed. User must have storage.buckets.get permission on the bucket being accessed. | ||
--help -h |
false | display the help message | |
--interval-merging-rule -imr |
ALL | Interval merging rule for abutting intervals | |
--intervals -L |
One or more genomic intervals over which to operate | ||
--lookahead-cache-bp |
100000 | Number of base-pairs to cache when querying variants. Can be overridden in individual data source configuration files. | |
--sites-only-vcf-output |
false | If true, don't emit genotype fields when writing vcf file output. | |
--transcript-list |
File to use as a list of transcripts (one transcript ID per line, version numbers are ignored) OR A set of transcript IDs to use for annotation to override selected transcript. | ||
--transcript-selection-mode |
CANONICAL | Method of detailed transcript selection. This will select the transcript for detailed annotation (CANONICAL, ALL, or BEST_EFFECT). | |
--version |
false | display the version number for this tool | |
Optional Common Arguments | |||
--add-output-sam-program-record |
true | If true, adds a PG tag to created SAM/BAM/CRAM files. | |
--add-output-vcf-command-line |
true | If true, adds a command line header line to created VCF files. | |
--create-output-bam-index -OBI |
true | If true, create a BAM/CRAM index when writing a coordinate-sorted BAM/CRAM file. | |
--create-output-bam-md5 -OBM |
false | If true, create a MD5 digest for any BAM/SAM/CRAM file created | |
--create-output-variant-index -OVI |
true | If true, create a VCF index when writing a coordinate-sorted VCF file. | |
--create-output-variant-md5 -OVM |
false | If true, create a a MD5 digest any VCF file created. | |
--disable-read-filter -DF |
Read filters to be disabled before analysis | ||
--disable-tool-default-read-filters |
false | Disable all tool default read filters (WARNING: many tools will not function correctly without their default read filters on) | |
--exclude-intervals -XL |
One or more genomic intervals to exclude from processing | ||
--gatk-config-file |
A configuration file to use with the GATK. | ||
--input -I |
BAM/SAM/CRAM file containing reads | ||
--interval-exclusion-padding -ixp |
0 | Amount of padding (in bp) to add to each interval you are excluding. | |
--interval-padding -ip |
0 | Amount of padding (in bp) to add to each interval you are including. | |
--interval-set-rule -isr |
UNION | Set merging approach to use for combining interval inputs | |
--lenient -LE |
false | Lenient processing of VCF files | |
--max-variants-per-shard |
0 | If non-zero, partitions VCF output into shards, each containing up to the given number of records. | |
--QUIET |
false | Whether to suppress job-summary info on System.err. | |
--read-filter -RF |
Read filters to be applied before analysis | ||
--read-index |
Indices to use for the read inputs. If specified, an index must be provided for every read input and in the same order as the read inputs. If this argument is not specified, the path to the index for each input will be inferred automatically. | ||
--read-validation-stringency -VS |
SILENT | Validation stringency for all SAM/BAM/CRAM/SRA files read by this program. The default stringency value SILENT can improve performance when processing a BAM file in which variable-length data (read, qualities, tags) do not otherwise need to be decoded. | |
--seconds-between-progress-updates |
10.0 | Output traversal statistics every time this many seconds elapse | |
--sequence-dictionary |
Use the given sequence dictionary as the master/canonical sequence dictionary. Must be a .dict file. | ||
--tmp-dir |
Temp directory to use. | ||
--use-jdk-deflater -jdk-deflater |
false | Whether to use the JdkDeflater (as opposed to IntelDeflater) | |
--use-jdk-inflater -jdk-inflater |
false | Whether to use the JdkInflater (as opposed to IntelInflater) | |
--verbosity |
INFO | Control verbosity of logging. | |
Advanced Arguments | |||
--min-num-bases-for-segment-funcotation |
150 | The minimum number of bases for a variant to be annotated as a segment. Recommended to be changed only for use with FuncotateSegments. Defaults to 150 | |
--showHidden |
false | display hidden arguments |
Argument details
Arguments in this list are specific to this tool. Keep in mind that other arguments are available that are shared with other tools (e.g. command-line GATK arguments); see Inherited arguments above.
--add-output-sam-program-record / -add-output-sam-program-record
If true, adds a PG tag to created SAM/BAM/CRAM files.
boolean true
--add-output-vcf-command-line / -add-output-vcf-command-line
If true, adds a command line header line to created VCF files.
boolean true
--alias-to-key-mapping
(Advanced) Mapping between an alias and key values that are recognized by the backend. Users should not typically have to specify this.
Mapping goes from old name to new name. Note that this is not necessarily what is output, since the output
renderer might further transform the name.
List[String] [MEAN_LOG2_COPY_RATIO:Segment_Mean, CALL:Segment_Call, sample:Sample, sample_id:Sample, NUM_POINTS_COPY_RATIO:Num_Probes]
--annotation-default
Annotations to include in all annotated variants if the annotation is not specified in the data sources (in the format :). This will add the specified annotation to every annotated variant if it is not already present.
List[String] []
--annotation-override
Override values for annotations (in the format :). Replaces existing annotations of the given name with given values.
List[String] []
--arguments_file
read one or more arguments files and add them to the command line
List[File] []
--cloud-index-prefetch-buffer / -CIPB
Size of the cloud-only prefetch buffer (in MB; 0 to disable). Defaults to cloudPrefetchBuffer if unset.
int -1 [ [ -∞ ∞ ] ]
--cloud-prefetch-buffer / -CPB
Size of the cloud-only prefetch buffer (in MB; 0 to disable).
int 40 [ [ -∞ ∞ ] ]
--create-output-bam-index / -OBI
If true, create a BAM/CRAM index when writing a coordinate-sorted BAM/CRAM file.
boolean true
--create-output-bam-md5 / -OBM
If true, create a MD5 digest for any BAM/SAM/CRAM file created
boolean false
--create-output-variant-index / -OVI
If true, create a VCF index when writing a coordinate-sorted VCF file.
boolean true
--create-output-variant-md5 / -OVM
If true, create a a MD5 digest any VCF file created.
boolean false
--data-sources-path
The path to a data source folder for Funcotator. May be specified more than once to handle multiple data source folders.
R List[String] []
--disable-bam-index-caching / -DBIC
If true, don't cache bam indexes, this will reduce memory requirements but may harm performance if many intervals are specified. Caching is automatically disabled if there are no intervals specified.
boolean false
--disable-read-filter / -DF
Read filters to be disabled before analysis
List[String] []
--disable-sequence-dictionary-validation / -disable-sequence-dictionary-validation
If specified, do not check the sequence dictionaries from our inputs for compatibility. Use at your own risk!
boolean false
--disable-tool-default-read-filters / -disable-tool-default-read-filters
Disable all tool default read filters (WARNING: many tools will not function correctly without their default read filters on)
boolean false
--exclude-field
Fields that should not be rendered in the final output. Only exact name matches will be excluded.
Set[String] []
--exclude-intervals / -XL
One or more genomic intervals to exclude from processing
Use this argument to exclude certain parts of the genome from the analysis (like -L, but the opposite).
This argument can be specified multiple times. You can use samtools-style intervals either explicitly on the
command line (e.g. -XL 1 or -XL 1:100-200) or by loading in a file containing a list of intervals
(e.g. -XL myFile.intervals).
List[String] []
--gatk-config-file
A configuration file to use with the GATK.
String null
--gcs-max-retries / -gcs-retries
If the GCS bucket channel errors out, how many times it will attempt to re-initiate the connection
int 20 [ [ -∞ ∞ ] ]
--gcs-project-for-requester-pays
Project to bill when accessing "requester pays" buckets. If unset, these buckets cannot be accessed. User must have storage.buckets.get permission on the bucket being accessed.
String ""
--help / -h
display the help message
boolean false
--input / -I
BAM/SAM/CRAM file containing reads
List[GATKPath] []
--interval-exclusion-padding / -ixp
Amount of padding (in bp) to add to each interval you are excluding.
Use this to add padding to the intervals specified using -XL. For example, '-XL 1:100' with a
padding value of 20 would turn into '-XL 1:80-120'. This is typically used to add padding around targets when
analyzing exomes.
int 0 [ [ -∞ ∞ ] ]
--interval-merging-rule / -imr
Interval merging rule for abutting intervals
By default, the program merges abutting intervals (i.e. intervals that are directly side-by-side but do not
actually overlap) into a single continuous interval. However you can change this behavior if you want them to be
treated as separate intervals instead.
The --interval-merging-rule argument is an enumerated type (IntervalMergingRule), which can have one of the following values:
- ALL
- OVERLAPPING_ONLY
IntervalMergingRule ALL
--interval-padding / -ip
Amount of padding (in bp) to add to each interval you are including.
Use this to add padding to the intervals specified using -L. For example, '-L 1:100' with a
padding value of 20 would turn into '-L 1:80-120'. This is typically used to add padding around targets when
analyzing exomes.
int 0 [ [ -∞ ∞ ] ]
--interval-set-rule / -isr
Set merging approach to use for combining interval inputs
By default, the program will take the UNION of all intervals specified using -L and/or -XL. However, you can
change this setting for -L, for example if you want to take the INTERSECTION of the sets instead. E.g. to
perform the analysis only on chromosome 1 exomes, you could specify -L exomes.intervals -L 1 --interval-set-rule
INTERSECTION. However, it is not possible to modify the merging approach for intervals passed using -XL (they will
always be merged using UNION).
Note that if you specify both -L and -XL, the -XL interval set will be subtracted from the -L interval set.
The --interval-set-rule argument is an enumerated type (IntervalSetRule), which can have one of the following values:
- UNION
- Take the union of all intervals
- INTERSECTION
- Take the intersection of intervals (the subset that overlaps all intervals specified)
IntervalSetRule UNION
--intervals / -L
One or more genomic intervals over which to operate
List[String] []
--lenient / -LE
Lenient processing of VCF files
boolean false
--lookahead-cache-bp
Number of base-pairs to cache when querying variants. Can be overridden in individual data source configuration files.
int 100000 [ [ 0 ∞ ] ]
--max-variants-per-shard
If non-zero, partitions VCF output into shards, each containing up to the given number of records.
int 0 [ [ 0 ∞ ] ]
--min-num-bases-for-segment-funcotation
The minimum number of bases for a variant to be annotated as a segment. Recommended to be changed only for use with FuncotateSegments. Defaults to 150
int 150 [ [ -∞ ∞ ] ]
--output / -O
Output file to which annotated variants should be written.
R File null
--output-file-format
The output file format. Either VCF, MAF, or SEG. Please note that MAF output for germline use case VCFs is unsupported. SEG will generate two output files: a simple tsv and a gene list.
The --output-file-format argument is an enumerated type (OutputFormatType), which can have one of the following values:
- VCF
- MAF
- SEG
R OutputFormatType null
--QUIET
Whether to suppress job-summary info on System.err.
Boolean false
--read-filter / -RF
Read filters to be applied before analysis
List[String] []
--read-index / -read-index
Indices to use for the read inputs. If specified, an index must be provided for every read input and in the same order as the read inputs. If this argument is not specified, the path to the index for each input will be inferred automatically.
List[GATKPath] []
--read-validation-stringency / -VS
Validation stringency for all SAM/BAM/CRAM/SRA files read by this program. The default stringency value SILENT can improve performance when processing a BAM file in which variable-length data (read, qualities, tags) do not otherwise need to be decoded.
The --read-validation-stringency argument is an enumerated type (ValidationStringency), which can have one of the following values:
- STRICT
- LENIENT
- SILENT
ValidationStringency SILENT
--ref-version
The version of the Human Genome reference to use (e.g. hg19, hg38, etc.). This will correspond to a sub-folder of each data source corresponding to that data source for the given reference.
R String null
--reference / -R
Reference sequence file
R GATKPath null
--seconds-between-progress-updates / -seconds-between-progress-updates
Output traversal statistics every time this many seconds elapse
double 10.0 [ [ -∞ ∞ ] ]
--segments
Input segment file (tab-separated values). Must have a call column.
R GATKPath null
--sequence-dictionary / -sequence-dictionary
Use the given sequence dictionary as the master/canonical sequence dictionary. Must be a .dict file.
GATKPath null
--showHidden / -showHidden
display hidden arguments
boolean false
--sites-only-vcf-output
If true, don't emit genotype fields when writing vcf file output.
boolean false
--tmp-dir
Temp directory to use.
GATKPath null
--transcript-list
File to use as a list of transcripts (one transcript ID per line, version numbers are ignored) OR A set of transcript IDs to use for annotation to override selected transcript.
Set[String] []
--transcript-selection-mode
Method of detailed transcript selection. This will select the transcript for detailed annotation (CANONICAL, ALL, or BEST_EFFECT).
The --transcript-selection-mode argument is an enumerated type (TranscriptSelectionMode), which can have one of the following values:
- BEST_EFFECT
- BEST_EFFECT Select a transcript to be reported with details with priority on effect according to the folowing list of selection criteria: Choose the transcript that is on the custom list specified by the user. If no list was specified, treat as if no transcripts were on the list (tie). In case of tie, choose the transcript that yields the variant classification highest on the variant classification rank list (see below). If still a tie, choose the transcript with highest level of curation. Note that this means lower number is better for level (see below). If still a tie, choose the transcript with the best appris annotation (see below). If still a tie, choose the transcript with the longest transcript sequence length. If still a tie, choose the first transcript, alphabetically. Levels of Curation: 1 (verified loci) 2 manually annotated loci 3 automatically annotated loci Variant Classification Scores (See {@link org.broadinstitute.hellbender.tools.funcotator.dataSources.gencode.GencodeFuncotation.VariantClassification} as well): De_novo_Start_OutOfFrame 0 Nonsense_Mutation 0 Nonstop_Mutation 0 Missense_Mutation 1 De_novo_Start_InFrame 1 In_Frame_Del 1 In_Frame_Ins 1 Frame_Shift_Del 2 Frame_Shift_Ins 2 Frame_Shift_Sub 2 Start_Codon_SNP 3 Start_Codon_Del 3 Start_Codon_Ins 3 Start_Codon_DNP 3 Start_Codon_TNP 3 Start_Codon_ONP 3 Stop_Codon_SNP 3 Stop_Codon_Del 3 Stop_Codon_Ins 3 Stop_Codon_DNP 3 Stop_Codon_TNP 3 Stop_Codon_ONP 3 Splice_Site 4 Splice_Site_SNP 4 Splice_Site_Del 4 Splice_Site_Ins 4 Splice_Site_DNP 4 Splice_Site_TNP 4 Splice_Site_ONP 4 Splice_Site 4 miRNA 4 Silent 5 3UTR 6 5UTR 6 Intron 7 5Flank 8 3Flank 8 Non-coding_Transcript 9 IGR 20 TX-REF-MISMATCH 100 APPRIS Ranks (http://appris.bioinfo.cnio.es/): appris_principal appris_candidate_highest_score appris_candidate_longest_ccds appris_candidate_ccds appris_candidate_longest_seq appris_candidate_longest appris_candidate no appris tag present
- CANONICAL
- CANONICAL Select a transcript to be reported with details with priority on canonical order according to the folowing list of selection criteria: Choose the transcript that is on the custom list specified by the user. If no list was specified, treat as if all transcripts were on the list (tie). In case of tie, choose the transcript with highest level of curation. Note that this means lower number is better for level (see below). If still a tie, choose the transcript that yields the variant classification highest on the variant classification rank list (see below). If still a tie, choose the transcript with the best appris annotation (see below). If still a tie, choose the transcript with the longest transcript sequence length. If still a tie, choose the first transcript, alphabetically. Levels of Curation: 1 (verified loci) 2 manually annotated loci 3 automatically annotated loci Variant Classification Scores (See {@link GencodeFuncotation.VariantClassification} as well): De_novo_Start_OutOfFrame 0 Nonsense_Mutation 0 Nonstop_Mutation 0 Missense_Mutation 1 De_novo_Start_InFrame 1 In_Frame_Del 1 In_Frame_Ins 1 Frame_Shift_Del 2 Frame_Shift_Ins 2 Frame_Shift_Sub 2 Start_Codon_SNP 3 Start_Codon_Del 3 Start_Codon_Ins 3 Start_Codon_DNP 3 Start_Codon_TNP 3 Start_Codon_ONP 3 Stop_Codon_SNP 3 Stop_Codon_Del 3 Stop_Codon_Ins 3 Stop_Codon_DNP 3 Stop_Codon_TNP 3 Stop_Codon_ONP 3 Splice_Site 4 Splice_Site_SNP 4 Splice_Site_Del 4 Splice_Site_Ins 4 Splice_Site_DNP 4 Splice_Site_TNP 4 Splice_Site_ONP 4 Splice_Site 4 miRNA 4 Silent 5 3UTR 6 5UTR 6 Intron 7 5Flank 8 3Flank 8 Non-coding_Transcript 9 IGR 20 TX-REF-MISMATCH 100 APPRIS Ranks (http://appris.bioinfo.cnio.es/): appris_principal appris_candidate_highest_score appris_candidate_longest_ccds appris_candidate_ccds appris_candidate_longest_seq appris_candidate_longest appris_candidate no appris tag present
- ALL
- Same as CANONICAL, but indicates that no transcripts should be dropped. Render all overlapping transcripts.
TranscriptSelectionMode CANONICAL
--use-jdk-deflater / -jdk-deflater
Whether to use the JdkDeflater (as opposed to IntelDeflater)
boolean false
--use-jdk-inflater / -jdk-inflater
Whether to use the JdkInflater (as opposed to IntelInflater)
boolean false
--verbosity / -verbosity
Control verbosity of logging.
The --verbosity argument is an enumerated type (LogLevel), which can have one of the following values:
- ERROR
- WARNING
- INFO
- DEBUG
LogLevel INFO
--version
display the version number for this tool
boolean false
GATK version 4.2.2.0-SNAPSHOT built at Thu, 19 Aug 2021 09:49:28 -0700.
0 comments
Please sign in to leave a comment.