Lifts over an interval list from one reference build to another. This tool adjusts the coordinates in an interval list on one reference to its homologous interval list on another reference, based on a chain file that describes the correspondence between the two references. It is based on the UCSC LiftOver tool (see: http://genome.ucsc.edu/cgi-bin/hgLiftOver) and uses a UCSC chain file to guide its operation. It accepts a Picard interval_list file as an input. See IntervalListTools documentation for information on interval_list format.Note: for lifting over VCF files use LiftoverVcf tool.

Usage example:

java -jar picard.jar LiftOverIntervalList \ I=input.interval_list \ O=output.interval_list \ SD=reference_sequence.dict \ CHAIN=build.chain

Return codes

If all the intervals lifted over successfully, program will return 0. It will return 1 otherwise.

Caveats

An interval is "lifted" in its entirety, but it might intersect (a "hit") with multiple chain-blocks. Instead of placing the interval in multiple hits, it is lifted over using the first hit that passes the threshold of MIN_LIFTOVER_PCT. For large enough MIN_LIFTOVER_PCT this is non-ambiguous, but if one uses small values of MIN_LIFTOVER_PCT (perhaps in order to increase the rate of successful hits...) the liftover could end up going to the smaller of two good hits. On the other hand, if none of the hits pass the threshold a warning will be emitted and the interval will not be lifted.

Category Intervals Manipulation

---

Overview

This tool adjusts the coordinates in an interval list on one reference to its homologous interval list on another reference, based on a chain file that describes the correspondence between the two references. It is based on the UCSC LiftOver tool and uses a UCSC chain file to guide its operation. It accepts a Picard interval_list file as an input. See IntervalListTools documentation for information on interval_list format. Note: for lifting over VCF files use LiftoverVcf tool.

Usage example:

 java -jar picard.jar LiftOverIntervalList \
       I=input.interval_list \
       O=output.interval_list \
       SD=reference_sequence.dict \
       CHAIN=build.chain
 

Return codes

If all the intervals lifted over successfully, program will return 0. It will return 1 otherwise.

Caveats

An interval is "lifted" in its entirety, but it might intersect (a "hit") with multiple chain-blocks. Instead of placing the interval in multiple hits, it is lifted over using the first hit that passes the threshold of #MIN_LIFTOVER_PCT. For large enough #MIN_LIFTOVER_PCT this is non-ambiguous, but if one uses small values of #MIN_LIFTOVER_PCT (perhaps in order to increase the rate of successful hits...) the liftover could end up going to the smaller of two good hits. On the other hand, if none of the hits pass the threshold a warning will be emitted and the interval will not be lifted.

LiftOverIntervalList (Picard) specific arguments

This table summarizes the command-line arguments that are specific to this tool. For more details on each argument, see the list further down below the table or click on an argument name to jump directly to that entry in the list.

Argument name(s)	Default value	Summary
Required Arguments
--CHAIN		Chain file that guides the LiftOver process.
--INPUT  -I		The input interval list to be lifted over.
--OUTPUT  -O		The output interval list file.
--SEQUENCE_DICTIONARY  -SD		Sequence dictionary to place in the output interval list. (This should be any file from which the dictionary of the target reference can be extracted.)
Optional Tool Arguments
--arguments_file		read one or more arguments files and add them to the command line
--help  -h	false	display the help message
--MIN_LIFTOVER_PCT	0.95	Minimum percentage of bases in each input interval that must map to output interval for liftover of that interval to occur. If the program fails to find a good target for an interval, a warning will be emitted and the interval will be dropped from the output.
--REJECT		Interval List file for intervals that were rejected
--version	false	display the version number for this tool
Optional Common Arguments
--COMPRESSION_LEVEL	5	Compression level for all compressed files created (e.g. BAM and VCF).
--CREATE_INDEX	false	Whether to create an index when writing VCF or coordinate sorted BAM output.
--CREATE_MD5_FILE	false	Whether to create an MD5 digest for any BAM or FASTQ files created.
--GA4GH_CLIENT_SECRETS	client_secrets.json	Google Genomics API client_secrets.json file path.
--MAX_RECORDS_IN_RAM	500000	When writing files that need to be sorted, this will specify the number of records stored in RAM before spilling to disk. Increasing this number reduces the number of file handles needed to sort the file, and increases the amount of RAM needed.
--QUIET	false	Whether to suppress job-summary info on System.err.
--REFERENCE_SEQUENCE  -R		Reference sequence file.
--TMP_DIR		One or more directories with space available to be used by this program for temporary storage of working files
--USE_JDK_DEFLATER  -use_jdk_deflater	false	Use the JDK Deflater instead of the Intel Deflater for writing compressed output
--USE_JDK_INFLATER  -use_jdk_inflater	false	Use the JDK Inflater instead of the Intel Inflater for reading compressed input
--VALIDATION_STRINGENCY	STRICT	Validation stringency for all SAM files read by this program. Setting stringency to SILENT can improve performance when processing a BAM file in which variable-length data (read, qualities, tags) do not otherwise need to be decoded.
--VERBOSITY	INFO	Control verbosity of logging.
Advanced Arguments
--showHidden	false	display hidden arguments

Argument details

Arguments in this list are specific to this tool. Keep in mind that other arguments are available that are shared with other tools (e.g. command-line GATK arguments); see Inherited arguments above.

---

--arguments_file

read one or more arguments files and add them to the command line

List[File]  []

---

--CHAIN

Chain file that guides the LiftOver process.

R File  null

---

--COMPRESSION_LEVEL

Compression level for all compressed files created (e.g. BAM and VCF).

int  5  [ [ -∞  ∞ ] ]

---

--CREATE_INDEX

Whether to create an index when writing VCF or coordinate sorted BAM output.

Boolean  false

---

--CREATE_MD5_FILE

Whether to create an MD5 digest for any BAM or FASTQ files created.

boolean  false

---

--GA4GH_CLIENT_SECRETS

Google Genomics API client_secrets.json file path.

String  client_secrets.json

---

--help / -h

display the help message

boolean  false

---

--INPUT / -I

The input interval list to be lifted over.

R File  null

---

--MAX_RECORDS_IN_RAM

When writing files that need to be sorted, this will specify the number of records stored in RAM before spilling to disk. Increasing this number reduces the number of file handles needed to sort the file, and increases the amount of RAM needed.

Integer  500000  [ [ -∞  ∞ ] ]

---

--MIN_LIFTOVER_PCT

Minimum percentage of bases in each input interval that must map to output interval for liftover of that interval to occur. If the program fails to find a good target for an interval, a warning will be emitted and the interval will be dropped from the output.

double  0.95  [ [ -∞  ∞ ] ]

---

--OUTPUT / -O

The output interval list file.

R File  null

---

--QUIET

Whether to suppress job-summary info on System.err.

Boolean  false

---

--REFERENCE_SEQUENCE / -R

Reference sequence file.

File  null

---

--REJECT

Interval List file for intervals that were rejected

File  null

---

--SEQUENCE_DICTIONARY / -SD

Sequence dictionary to place in the output interval list. (This should be any file from which the dictionary of the target reference can be extracted.)

R File  null

---

--showHidden / -showHidden

display hidden arguments

boolean  false

---

--TMP_DIR

One or more directories with space available to be used by this program for temporary storage of working files

List[File]  []

---

--USE_JDK_DEFLATER / -use_jdk_deflater

Use the JDK Deflater instead of the Intel Deflater for writing compressed output

Boolean  false

---

--USE_JDK_INFLATER / -use_jdk_inflater

Use the JDK Inflater instead of the Intel Inflater for reading compressed input

Boolean  false

---

--VALIDATION_STRINGENCY

Validation stringency for all SAM files read by this program. Setting stringency to SILENT can improve performance when processing a BAM file in which variable-length data (read, qualities, tags) do not otherwise need to be decoded.

The --VALIDATION_STRINGENCY argument is an enumerated type (ValidationStringency), which can have one of the following values:

STRICT

LENIENT

SILENT

ValidationStringency  STRICT

---

--VERBOSITY

Control verbosity of logging.

The --VERBOSITY argument is an enumerated type (LogLevel), which can have one of the following values:

ERROR

WARNING

INFO

DEBUG

LogLevel  INFO

---

--version

display the version number for this tool

boolean  false

---

Return to top

---

GATK version 4.2.2.0-SNAPSHOT built at Thu, 19 Aug 2021 09:49:28 -0700.