Examines aligned records in the supplied SAM or BAM file to locate duplicate molecules. All records are then written to the output file with the duplicate records flagged.
Category Read Data Manipulation
Overview
This is a simple tool to mark duplicates using the DuplicateSetIterator, DuplicateSet, and SAMRecordDuplicateComparator. Users should continue to use MarkDuplicates in general. The main motivation of this tool was the fact that MarkDuplicates has many, many, many useful test cases, but few unit tests for validating individual duplicate sets. To test the DuplicateSetIterator, DuplicateSet, and SAMRecordDuplicateComparator, the most expedient method was to write this tool and make sure it behaves similarly to MarkDuplicates. Not the best, I know, but good enough. NH 06/25/2015. See MarkDuplicates for more details.SimpleMarkDuplicatesWithMateCigar (Picard) specific arguments
This table summarizes the command-line arguments that are specific to this tool. For more details on each argument, see the list further down below the table or click on an argument name to jump directly to that entry in the list.
Argument name(s) | Default value | Summary | |
---|---|---|---|
Required Arguments | |||
--INPUT -I |
[] | One or more input SAM or BAM files to analyze. Must be coordinate sorted. | |
--METRICS_FILE -M |
null | File to write duplication metrics to | |
--OUTPUT -O |
null | The output file to write marked records to | |
Optional Tool Arguments | |||
--arguments_file |
[] | read one or more arguments files and add them to the command line | |
--ASSUME_SORT_ORDER -ASO |
null | If not null, assume that the input file has this order even if the header says otherwise. | |
--BARCODE_TAG |
null | Barcode SAM tag (ex. BC for 10X Genomics) | |
--CLEAR_DT |
true | Clear DT tag from input SAM records. Should be set to false if input SAM doesn't have this tag. Default true | |
--COMMENT -CO |
[] | Comment(s) to include in the output file's header. | |
--DUPLICATE_SCORING_STRATEGY -DS |
SUM_OF_BASE_QUALITIES | The scoring strategy for choosing the non-duplicate among candidates. | |
--help -h |
false | display the help message | |
--MAX_FILE_HANDLES_FOR_READ_ENDS_MAP -MAX_FILE_HANDLES |
8000 | Maximum number of file handles to keep open when spilling read ends to disk. Set this number a little lower than the per-process maximum number of file that may be open. This number can be found by executing the 'ulimit -n' command on a Unix system. | |
--MAX_OPTICAL_DUPLICATE_SET_SIZE |
300000 | This number is the maximum size of a set of duplicate reads for which we will attempt to determine which are optical duplicates. Please be aware that if you raise this value too high and do encounter a very large set of duplicate reads, it will severely affect the runtime of this tool. To completely disable this check, set the value to -1. | |
--MAX_SEQUENCES_FOR_DISK_READ_ENDS_MAP -MAX_SEQS |
50000 | This option is obsolete. ReadEnds will always be spilled to disk. | |
--OPTICAL_DUPLICATE_PIXEL_DISTANCE |
100 | The maximum offset between two duplicate clusters in order to consider them optical duplicates. The default is appropriate for unpatterned versions of the Illumina platform. For the patterned flowcell models, 2500 is moreappropriate. For other platforms and models, users should experiment to find what works best. | |
--PROGRAM_GROUP_COMMAND_LINE -PG_COMMAND |
null | Value of CL tag of PG record to be created. If not supplied the command line will be detected automatically. | |
--PROGRAM_GROUP_NAME -PG_NAME |
SimpleMarkDuplicatesWithMateCigar | Value of PN tag of PG record to be created. | |
--PROGRAM_GROUP_VERSION -PG_VERSION |
null | Value of VN tag of PG record to be created. If not specified, the version will be detected automatically. | |
--PROGRAM_RECORD_ID -PG |
MarkDuplicates | The program record ID for the @PG record(s) created by this program. Set to null to disable PG record creation. This string may have a suffix appended to avoid collision with other program record IDs. | |
--READ_NAME_REGEX |
Regular expression that can be used to parse read names in the incoming SAM file. Read names are parsed to extract three variables: tile/region, x coordinate and y coordinate. These values are used to estimate the rate of optical duplication in order to give a more accurate estimated library size. Set this option to null to disable optical duplicate detection, e.g. for RNA-seq or other data where duplicate sets are extremely large and estimating library complexity is not an aim. Note that without optical duplicate counts, library size estimation will be inaccurate. The regular expression should contain three capture groups for the three variables, in order. It must match the entire read name. Note that if the default regex is specified, a regex match is not actually done, but instead the read name is split on colon character. For 5 element names, the 3rd, 4th and 5th elements are assumed to be tile, x and y values. For 7 element names (CASAVA 1.8), the 5th, 6th, and 7th elements are assumed to be tile, x and y values. | ||
--READ_ONE_BARCODE_TAG |
null | Read one barcode SAM tag (ex. BX for 10X Genomics) | |
--READ_TWO_BARCODE_TAG |
null | Read two barcode SAM tag (ex. BX for 10X Genomics) | |
--REMOVE_DUPLICATES |
false | If true do not write duplicates to the output file instead of writing them with appropriate flags set. | |
--REMOVE_SEQUENCING_DUPLICATES |
false | If true remove 'optical' duplicates and other duplicates that appear to have arisen from the sequencing process instead of the library preparation process, even if REMOVE_DUPLICATES is false. If REMOVE_DUPLICATES is true, all duplicates are removed and this option is ignored. | |
--SORTING_COLLECTION_SIZE_RATIO |
0.25 | This number, plus the maximum RAM available to the JVM, determine the memory footprint used by some of the sorting collections. If you are running out of memory, try reducing this number. | |
--TAG_DUPLICATE_SET_MEMBERS |
false | If a read appears in a duplicate set, add two tags. The first tag, DUPLICATE_SET_SIZE_TAG (DS), indicates the size of the duplicate set. The smallest possible DS value is 2 which occurs when two reads map to the same portion of the reference only one of which is marked as duplicate. The second tag, DUPLICATE_SET_INDEX_TAG (DI), represents a unique identifier for the duplicate set to which the record belongs. This identifier is the index-in-file of the representative read that was selected out of the duplicate set. | |
--TAGGING_POLICY |
DontTag | Determines how duplicate types are recorded in the DT optional attribute. | |
--version |
false | display the version number for this tool | |
Optional Common Arguments | |||
--ADD_PG_TAG_TO_READS |
true | Add PG tag to each read in a SAM or BAM | |
--COMPRESSION_LEVEL |
5 | Compression level for all compressed files created (e.g. BAM and VCF). | |
--CREATE_INDEX |
false | Whether to create a BAM index when writing a coordinate-sorted BAM file. | |
--CREATE_MD5_FILE |
false | Whether to create an MD5 digest for any BAM or FASTQ files created. | |
--GA4GH_CLIENT_SECRETS |
client_secrets.json | Google Genomics API client_secrets.json file path. | |
--MAX_RECORDS_IN_RAM |
500000 | When writing files that need to be sorted, this will specify the number of records stored in RAM before spilling to disk. Increasing this number reduces the number of file handles needed to sort the file, and increases the amount of RAM needed. | |
--QUIET |
false | Whether to suppress job-summary info on System.err. | |
--REFERENCE_SEQUENCE -R |
null | Reference sequence file. | |
--TMP_DIR |
[] | One or more directories with space available to be used by this program for temporary storage of working files | |
--USE_JDK_DEFLATER -use_jdk_deflater |
false | Use the JDK Deflater instead of the Intel Deflater for writing compressed output | |
--USE_JDK_INFLATER -use_jdk_inflater |
false | Use the JDK Inflater instead of the Intel Inflater for reading compressed input | |
--VALIDATION_STRINGENCY |
STRICT | Validation stringency for all SAM files read by this program. Setting stringency to SILENT can improve performance when processing a BAM file in which variable-length data (read, qualities, tags) do not otherwise need to be decoded. | |
--VERBOSITY |
INFO | Control verbosity of logging. | |
Advanced Arguments | |||
--showHidden |
false | display hidden arguments | |
Deprecated Arguments | |||
--ASSUME_SORTED -AS |
false | If true, assume that the input file is coordinate sorted even if the header says otherwise. Deprecated, used ASSUME_SORT_ORDER=coordinate instead. |
Argument details
Arguments in this list are specific to this tool. Keep in mind that other arguments are available that are shared with other tools (e.g. command-line GATK arguments); see Inherited arguments above.
--ADD_PG_TAG_TO_READS / NA
Add PG tag to each read in a SAM or BAM
Boolean true
--arguments_file / NA
read one or more arguments files and add them to the command line
List[File] []
--ASSUME_SORT_ORDER / -ASO
If not null, assume that the input file has this order even if the header says otherwise.
Exclusion: This argument cannot be used at the same time as ASSUME_SORTED
.
The --ASSUME_SORT_ORDER argument is an enumerated type (SortOrder), which can have one of the following values:
- unsorted
- queryname
- coordinate
- duplicate
- unknown
SortOrder null
--ASSUME_SORTED / -AS
If true, assume that the input file is coordinate sorted even if the header says otherwise. Deprecated, used ASSUME_SORT_ORDER=coordinate instead.
Exclusion: This argument cannot be used at the same time as ASSUME_SORT_ORDER, ASO
.
boolean false
--BARCODE_TAG / NA
Barcode SAM tag (ex. BC for 10X Genomics)
String null
--CLEAR_DT / NA
Clear DT tag from input SAM records. Should be set to false if input SAM doesn't have this tag. Default true
boolean true
--COMMENT / -CO
Comment(s) to include in the output file's header.
List[String] []
--COMPRESSION_LEVEL / NA
Compression level for all compressed files created (e.g. BAM and VCF).
int 5 [ [ -∞ ∞ ] ]
--CREATE_INDEX / NA
Whether to create a BAM index when writing a coordinate-sorted BAM file.
Boolean false
--CREATE_MD5_FILE / NA
Whether to create an MD5 digest for any BAM or FASTQ files created.
boolean false
--DUPLICATE_SCORING_STRATEGY / -DS
The scoring strategy for choosing the non-duplicate among candidates.
The --DUPLICATE_SCORING_STRATEGY argument is an enumerated type (ScoringStrategy), which can have one of the following values:
- SUM_OF_BASE_QUALITIES
- TOTAL_MAPPED_REFERENCE_LENGTH
- RANDOM
ScoringStrategy SUM_OF_BASE_QUALITIES
--GA4GH_CLIENT_SECRETS / NA
Google Genomics API client_secrets.json file path.
String client_secrets.json
--help / -h
display the help message
boolean false
--INPUT / -I
One or more input SAM or BAM files to analyze. Must be coordinate sorted.
R List[String] []
--MAX_FILE_HANDLES_FOR_READ_ENDS_MAP / -MAX_FILE_HANDLES
Maximum number of file handles to keep open when spilling read ends to disk. Set this number a little lower than the per-process maximum number of file that may be open. This number can be found by executing the 'ulimit -n' command on a Unix system.
int 8000 [ [ -∞ ∞ ] ]
--MAX_OPTICAL_DUPLICATE_SET_SIZE / NA
This number is the maximum size of a set of duplicate reads for which we will attempt to determine which are optical duplicates. Please be aware that if you raise this value too high and do encounter a very large set of duplicate reads, it will severely affect the runtime of this tool. To completely disable this check, set the value to -1.
long 300000 [ [ -∞ ∞ ] ]
--MAX_RECORDS_IN_RAM / NA
When writing files that need to be sorted, this will specify the number of records stored in RAM before spilling to disk. Increasing this number reduces the number of file handles needed to sort the file, and increases the amount of RAM needed.
Integer 500000 [ [ -∞ ∞ ] ]
--MAX_SEQUENCES_FOR_DISK_READ_ENDS_MAP / -MAX_SEQS
This option is obsolete. ReadEnds will always be spilled to disk.
If more than this many sequences in SAM file, don't spill to disk because there will not
be enough file handles.
int 50000 [ [ -∞ ∞ ] ]
--METRICS_FILE / -M
File to write duplication metrics to
R File null
--OPTICAL_DUPLICATE_PIXEL_DISTANCE / NA
The maximum offset between two duplicate clusters in order to consider them optical duplicates. The default is appropriate for unpatterned versions of the Illumina platform. For the patterned flowcell models, 2500 is moreappropriate. For other platforms and models, users should experiment to find what works best.
int 100 [ [ -∞ ∞ ] ]
--OUTPUT / -O
The output file to write marked records to
R File null
--PROGRAM_GROUP_COMMAND_LINE / -PG_COMMAND
Value of CL tag of PG record to be created. If not supplied the command line will be detected automatically.
String null
--PROGRAM_GROUP_NAME / -PG_NAME
Value of PN tag of PG record to be created.
String SimpleMarkDuplicatesWithMateCigar
--PROGRAM_GROUP_VERSION / -PG_VERSION
Value of VN tag of PG record to be created. If not specified, the version will be detected automatically.
String null
--PROGRAM_RECORD_ID / -PG
The program record ID for the @PG record(s) created by this program. Set to null to disable PG record creation. This string may have a suffix appended to avoid collision with other program record IDs.
String MarkDuplicates
--QUIET / NA
Whether to suppress job-summary info on System.err.
Boolean false
--READ_NAME_REGEX / NA
Regular expression that can be used to parse read names in the incoming SAM file. Read names are parsed to extract three variables: tile/region, x coordinate and y coordinate. These values are used to estimate the rate of optical duplication in order to give a more accurate estimated library size. Set this option to null to disable optical duplicate detection, e.g. for RNA-seq or other data where duplicate sets are extremely large and estimating library complexity is not an aim. Note that without optical duplicate counts, library size estimation will be inaccurate. The regular expression should contain three capture groups for the three variables, in order. It must match the entire read name. Note that if the default regex is specified, a regex match is not actually done, but instead the read name is split on colon character. For 5 element names, the 3rd, 4th and 5th elements are assumed to be tile, x and y values. For 7 element names (CASAVA 1.8), the 5th, 6th, and 7th elements are assumed to be tile, x and y values.
String
--READ_ONE_BARCODE_TAG / NA
Read one barcode SAM tag (ex. BX for 10X Genomics)
String null
--READ_TWO_BARCODE_TAG / NA
Read two barcode SAM tag (ex. BX for 10X Genomics)
String null
--REFERENCE_SEQUENCE / -R
Reference sequence file.
File null
--REMOVE_DUPLICATES / NA
If true do not write duplicates to the output file instead of writing them with appropriate flags set.
boolean false
--REMOVE_SEQUENCING_DUPLICATES / NA
If true remove 'optical' duplicates and other duplicates that appear to have arisen from the sequencing process instead of the library preparation process, even if REMOVE_DUPLICATES is false. If REMOVE_DUPLICATES is true, all duplicates are removed and this option is ignored.
boolean false
--showHidden / -showHidden
display hidden arguments
boolean false
--SORTING_COLLECTION_SIZE_RATIO / NA
This number, plus the maximum RAM available to the JVM, determine the memory footprint used by some of the sorting collections. If you are running out of memory, try reducing this number.
double 0.25 [ [ -∞ ∞ ] ]
--TAG_DUPLICATE_SET_MEMBERS / NA
If a read appears in a duplicate set, add two tags. The first tag, DUPLICATE_SET_SIZE_TAG (DS), indicates the size of the duplicate set. The smallest possible DS value is 2 which occurs when two reads map to the same portion of the reference only one of which is marked as duplicate. The second tag, DUPLICATE_SET_INDEX_TAG (DI), represents a unique identifier for the duplicate set to which the record belongs. This identifier is the index-in-file of the representative read that was selected out of the duplicate set.
boolean false
--TAGGING_POLICY / NA
Determines how duplicate types are recorded in the DT optional attribute.
The --TAGGING_POLICY argument is an enumerated type (DuplicateTaggingPolicy), which can have one of the following values:
- DontTag
- OpticalOnly
- All
DuplicateTaggingPolicy DontTag
--TMP_DIR / NA
One or more directories with space available to be used by this program for temporary storage of working files
List[File] []
--USE_JDK_DEFLATER / -use_jdk_deflater
Use the JDK Deflater instead of the Intel Deflater for writing compressed output
Boolean false
--USE_JDK_INFLATER / -use_jdk_inflater
Use the JDK Inflater instead of the Intel Inflater for reading compressed input
Boolean false
--VALIDATION_STRINGENCY / NA
Validation stringency for all SAM files read by this program. Setting stringency to SILENT can improve performance when processing a BAM file in which variable-length data (read, qualities, tags) do not otherwise need to be decoded.
The --VALIDATION_STRINGENCY argument is an enumerated type (ValidationStringency), which can have one of the following values:
- STRICT
- LENIENT
- SILENT
ValidationStringency STRICT
--VERBOSITY / NA
Control verbosity of logging.
The --VERBOSITY argument is an enumerated type (LogLevel), which can have one of the following values:
- ERROR
- WARNING
- INFO
- DEBUG
LogLevel INFO
--version / NA
display the version number for this tool
boolean false
GATK version 4.0.5.2 built at 25-50-2019 01:50:01.
0 comments
Please sign in to leave a comment.