Examines aligned records in the supplied SAM/BAM/CRAM file to locate duplicate molecules.
Category Read Data Manipulation
Overview
A better duplication marking algorithm that handles all cases including clipped and gapped alignments.MarkDuplicatesGATK specific arguments
This table summarizes the command-line arguments that are specific to this tool. For more details on each argument, see the list further down below the table or click on an argument name to jump directly to that entry in the list.
Argument name(s) | Default value | Summary | |
---|---|---|---|
Required Arguments | |||
--input -I |
[] | One or more input SAM/BAM/CRAM files to analyze. Must be coordinate sorted. | |
--metrics-file -M |
null | File to write duplication metrics to | |
--output -O |
null | The output file to write marked records to | |
Optional Tool Arguments | |||
--arguments_file |
[] | read one or more arguments files and add them to the command line | |
--ASSUME_SORTED -AS |
false | If true, assume that the input file is coordinate sorted even if the header says otherwise. | |
--COMMENT -CO |
[] | Comment(s) to include in the output file's header. | |
--duplicate-scoring-strategy -DS |
SUM_OF_BASE_QUALITIES | The scoring strategy for choosing the non-duplicate among candidates. | |
--gcs-max-retries -gcs-retries |
20 | If the GCS bucket channel errors out, how many times it will attempt to re-initiate the connection | |
--help -h |
false | display the help message | |
--MAX_FILE_HANDLES_FOR_READ_ENDS_MAP -MAX_FILE_HANDLES |
8000 | Maximum number of file handles to keep open when spilling read ends to disk. Set this number a little lower than the per-process maximum number of file that may be open. This number can be found by executing the 'ulimit -n' command on a Unix system. | |
--MAX_SEQUENCES_FOR_DISK_READ_ENDS_MAP -MAX_SEQS |
50000 | This option is obsolete. ReadEnds will always be spilled to disk. | |
--optical-duplicate-pixel-distance |
100 | The maximum offset between two duplicate clusters in order to consider them optical duplicates. This should usually be set to some fairly small number (e.g. 5-10 pixels) unless using later versions of the Illumina pipeline that multiply pixel values by 10, in which case 50-100 is more normal. | |
--PROGRAM_GROUP_COMMAND_LINE -PG_COMMAND |
null | Value of CL tag of PG record to be created. If not supplied the command line will be detected automatically. | |
--PROGRAM_GROUP_NAME -PG_NAME |
MarkDuplicatesGATK | Value of PN tag of PG record to be created. | |
--PROGRAM_GROUP_VERSION -PG_VERSION |
null | Value of VN tag of PG record to be created. If not specified, the version will be detected automatically. | |
--PROGRAM_RECORD_ID -PG |
MarkDuplicatesGATK | The program record ID for the @PG record(s) created by this program. Set to null to disable PG record creation. This string may have a suffix appended to avoid collision with other program record IDs. | |
--read-name-regex |
Regular expression that can be used to parse read names in the incoming SAM file. Read names are parsed to extract three variables: tile/region, x coordinate and y coordinate. These values are used to estimate the rate of optical duplication in order to give a more accurate estimated library size. Set this option to null to disable optical duplicate detection. The regular expression should contain three capture groups for the three variables, in order. It must match the entire read name. Note that if the default regex is specified, a regex match is not actually done, but instead the read name is split on colon character. For 5 element names, the 3rd, 4th and 5th elements are assumed to be tile, x and y values. For 7 element names (CASAVA 1.8), the 5th, 6th, and 7th elements are assumed to be tile, x and y values. | ||
--REMOVE_DUPLICATES |
false | If true do not write duplicates to the output file instead of writing them with appropriate flags set. | |
--reportMemoryStats |
false | Report Memory Stats at various times during the run | |
--SORTING_COLLECTION_SIZE_RATIO |
0.25 | This number, plus the maximum RAM available to the JVM, determine the memory footprint used by some of the sorting collections. If you are running out of memory, try reducing this number. | |
--version |
false | display the version number for this tool | |
Optional Common Arguments | |||
--COMPRESSION_LEVEL |
5 | Compression level for all compressed files created (e.g. BAM and GELI). | |
--CREATE_INDEX |
false | Whether to create a BAM index when writing a coordinate-sorted BAM file. | |
--CREATE_MD5_FILE |
false | Whether to create an MD5 digest for any BAM or FASTQ files created. | |
--gatk-config-file |
null | A configuration file to use with the GATK. | |
--MAX_RECORDS_IN_RAM |
500000 | When writing SAM files that need to be sorted, this will specify the number of records stored in RAM before spilling to disk. Increasing this number reduces the number of file handles needed to sort a SAM file, and increases the amount of RAM needed. | |
--QUIET |
false | Whether to suppress job-summary info on System.err. | |
--reference -R |
null | Reference sequence file. | |
--TMP_DIR |
[] | Undocumented option | |
--use-jdk-deflater -jdk-deflater |
false | Whether to use the JdkDeflater (as opposed to IntelDeflater) | |
--use-jdk-inflater -jdk-inflater |
false | Whether to use the JdkInflater (as opposed to IntelInflater) | |
--VALIDATION_STRINGENCY |
STRICT | Validation stringency for all SAM files read by this program. Setting stringency to SILENT can improve performance when processing a BAM file in which variable-length data (read, qualities, tags) do not otherwise need to be decoded. | |
--verbosity |
INFO | Control verbosity of logging. | |
Advanced Arguments | |||
--showHidden |
false | display hidden arguments |
Argument details
Arguments in this list are specific to this tool. Keep in mind that other arguments are available that are shared with other tools (e.g. command-line GATK arguments); see Inherited arguments above.
--arguments_file / NA
read one or more arguments files and add them to the command line
List[File] []
--ASSUME_SORTED / -AS
If true, assume that the input file is coordinate sorted even if the header says otherwise.
boolean false
--COMMENT / -CO
Comment(s) to include in the output file's header.
List[String] []
--COMPRESSION_LEVEL / NA
Compression level for all compressed files created (e.g. BAM and GELI).
int 5 [ [ -∞ ∞ ] ]
--CREATE_INDEX / NA
Whether to create a BAM index when writing a coordinate-sorted BAM file.
Boolean false
--CREATE_MD5_FILE / NA
Whether to create an MD5 digest for any BAM or FASTQ files created.
boolean false
--duplicate-scoring-strategy / -DS
The scoring strategy for choosing the non-duplicate among candidates.
The --duplicate-scoring-strategy argument is an enumerated type (ScoringStrategy), which can have one of the following values:
- SUM_OF_BASE_QUALITIES
- TOTAL_MAPPED_REFERENCE_LENGTH
- RANDOM
ScoringStrategy SUM_OF_BASE_QUALITIES
--gatk-config-file / NA
A configuration file to use with the GATK.
String null
--gcs-max-retries / -gcs-retries
If the GCS bucket channel errors out, how many times it will attempt to re-initiate the connection
int 20 [ [ -∞ ∞ ] ]
--help / -h
display the help message
boolean false
--input / -I
One or more input SAM/BAM/CRAM files to analyze. Must be coordinate sorted.
R List[File] []
--MAX_FILE_HANDLES_FOR_READ_ENDS_MAP / -MAX_FILE_HANDLES
Maximum number of file handles to keep open when spilling read ends to disk. Set this number a little lower than the per-process maximum number of file that may be open. This number can be found by executing the 'ulimit -n' command on a Unix system.
int 8000 [ [ -∞ ∞ ] ]
--MAX_RECORDS_IN_RAM / NA
When writing SAM files that need to be sorted, this will specify the number of records stored in RAM before spilling to disk. Increasing this number reduces the number of file handles needed to sort a SAM file, and increases the amount of RAM needed.
Integer 500000 [ [ -∞ ∞ ] ]
--MAX_SEQUENCES_FOR_DISK_READ_ENDS_MAP / -MAX_SEQS
This option is obsolete. ReadEnds will always be spilled to disk.
If more than this many sequences in SAM file, don't spill to disk because there will not
be enough file handles.
int 50000 [ [ -∞ ∞ ] ]
--metrics-file / -M
File to write duplication metrics to
R File null
--optical-duplicate-pixel-distance / NA
The maximum offset between two duplicate clusters in order to consider them optical duplicates. This should usually be set to some fairly small number (e.g. 5-10 pixels) unless using later versions of the Illumina pipeline that multiply pixel values by 10, in which case 50-100 is more normal.
int 100 [ [ -∞ ∞ ] ]
--output / -O
The output file to write marked records to
R File null
--PROGRAM_GROUP_COMMAND_LINE / -PG_COMMAND
Value of CL tag of PG record to be created. If not supplied the command line will be detected automatically.
String null
--PROGRAM_GROUP_NAME / -PG_NAME
Value of PN tag of PG record to be created.
String MarkDuplicatesGATK
--PROGRAM_GROUP_VERSION / -PG_VERSION
Value of VN tag of PG record to be created. If not specified, the version will be detected automatically.
String null
--PROGRAM_RECORD_ID / -PG
The program record ID for the @PG record(s) created by this program. Set to null to disable PG record creation. This string may have a suffix appended to avoid collision with other program record IDs.
String MarkDuplicatesGATK
--QUIET / NA
Whether to suppress job-summary info on System.err.
Boolean false
--read-name-regex / NA
Regular expression that can be used to parse read names in the incoming SAM file. Read names are parsed to extract three variables: tile/region, x coordinate and y coordinate. These values are used to estimate the rate of optical duplication in order to give a more accurate estimated library size. Set this option to null to disable optical duplicate detection. The regular expression should contain three capture groups for the three variables, in order. It must match the entire read name. Note that if the default regex is specified, a regex match is not actually done, but instead the read name is split on colon character. For 5 element names, the 3rd, 4th and 5th elements are assumed to be tile, x and y values. For 7 element names (CASAVA 1.8), the 5th, 6th, and 7th elements are assumed to be tile, x and y values.
String
--reference / -R
Reference sequence file.
File null
--REMOVE_DUPLICATES / NA
If true do not write duplicates to the output file instead of writing them with appropriate flags set.
boolean false
--reportMemoryStats / NA
Report Memory Stats at various times during the run
boolean false
--showHidden / -showHidden
display hidden arguments
boolean false
--SORTING_COLLECTION_SIZE_RATIO / NA
This number, plus the maximum RAM available to the JVM, determine the memory footprint used by some of the sorting collections. If you are running out of memory, try reducing this number.
double 0.25 [ [ -∞ ∞ ] ]
--TMP_DIR / NA
Undocumented option
List[File] []
--use-jdk-deflater / -jdk-deflater
Whether to use the JdkDeflater (as opposed to IntelDeflater)
boolean false
--use-jdk-inflater / -jdk-inflater
Whether to use the JdkInflater (as opposed to IntelInflater)
boolean false
--VALIDATION_STRINGENCY / NA
Validation stringency for all SAM files read by this program. Setting stringency to SILENT can improve performance when processing a BAM file in which variable-length data (read, qualities, tags) do not otherwise need to be decoded.
The --VALIDATION_STRINGENCY argument is an enumerated type (ValidationStringency), which can have one of the following values:
- STRICT
- LENIENT
- SILENT
ValidationStringency STRICT
--verbosity / -verbosity
Control verbosity of logging.
The --verbosity argument is an enumerated type (LogLevel), which can have one of the following values:
- ERROR
- WARNING
- INFO
- DEBUG
LogLevel INFO
--version / NA
display the version number for this tool
boolean false
GATK version 4.0.5.2 built at 25-50-2019 01:50:01.
0 comments
Please sign in to leave a comment.